Tens of thousands of competitors, pages of hard questions and unsatisfied exam preparation situations… Do not worried about all those annoying things! We, CertBus, help you with your SNIA SNIA SCSA S10-300 Snia Storage Architect-Assessment,Planning and Design exam. CertBus will assist you clear the S10-300 exam with SNIA SCSA S10-300 PDF and VCE questions. CertBus exam dumps are the most comprehensive ones.
We CertBus has our own expert team. They selected and published the latest S10-300 preparation materials from SNIA Official Exam-Center: http://www.certgod.com/S10-300.html
QUESTION NO: 2
What are three key advantages of deploying a director-based solution over a mesh of
switches? (Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: B,C,E
QUESTION NO: 9
A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The
customer wants a solution designed which allows access from 32 servers with no single
point of failure. Which number of HBAs and the associated throughput, provide server
access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C
QUESTION NO: 3
What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C
QUESTION NO: 11
What is the most important factor in determining sustained bandwidth in an IP SAN with
high bandwidth with long delays?
A. zero-copy TCP
B. IP fragmentation
C. Ethernet MTU size
D. TCP sliding window size
Answer: D
QUESTION NO: 8
A customer is using host based virtualization to mirror critical data between two vendors
disk arrays. Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: C,D
QUESTION NO: 1
You have been tasked with identifying upgrade options for your networked storage. Which
two should you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP,
and RFQs.
Answer: C,D
QUESTION NO: 4
2
Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each
server port requires 80 MB/s of one-way bandwidth, spread out evenly among the storage
devices. The customer would like to add 28 server ports along with 28 disk ports. Each
server will evenly distribute its traffic on each disk. Using 16 port 1 Gb switches, which
topology should you select to minimize the number of switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C
QUESTION NO: 6
When planning a NAS solution, which two sub-processes are associated with NAS Service
Capacity Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: B,C
QUESTION NO: 5
What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage
requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning
cycle, e.g. the financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the
estimated demand over the period of the planning horizon.
Answer: C
QUESTION NO: 10
A customer has a terabyte database and is required to back up the data daily. The SLA has
4
allotted 6 hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the
customer has a tape library with only five SDLT tape devices running at native speeds of
40 GB/hour. Which two should you do to successfully meet the expected SLA
requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: A,C
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the S10-300 exam successfully with our SNIA materials. CertBus Snia Storage Architect-Assessment,Planning and Design exam PDF and VCE are the latest and most accurate. We have the best SNIA in our team to make sure CertBus Snia Storage Architect-Assessment,Planning and Design exam questions and answers are the most valid. CertBus exam Snia Storage Architect-Assessment,Planning and Design exam dumps will help you to be the SNIA specialist, clear your S10-300 exam and get the final success.
S10-300 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mVk5mWUpvMzAyZkE/view?usp=sharing
S10-300 SNIA exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/S10-300.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.