CertBus New Updated EX200 Exam Dumps Free Download

CertBus 2020 Latest RedHat EX200 RHCSA Exam VCE and PDF Dumps for Free Download!

EX200 RHCSA Exam PDF and VCE Dumps : 111QAs Instant Download: https://www.certgod.com/EX200.html [100% EX200 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test EX200 PDF: https://www.certgod.com/online-pdf/EX200.pdf
☆ CertBus 2020 Latest EX200 RHCSA exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mZVBXc2xUejVzTUk/view?usp=sharing

Following EX200 111QAs are all new published by RedHat Official Exam Center

You can prepare for your RedHat RHCSA Newest EX200 vce dumps exam with less time and effort because we,CertBus, will act as your reliable guide to pass your RedHat RHCSA Newest EX200 vce exam. Our RedHat RHCSA Latest EX200 vce exam dumps are the latest and with the most accurate answers. We offer RedHat RHCSA Hotest EX200 pdf dumps PDF dumps and RedHat RHCSA Jul 17,2020 Newest EX200 practice VCE. Both are the most effective version.

EX200 exam academy – free online EX200 exam study guide resource for EX200 associate specialty exams. CertBus – leading source of EX200 certification exam learning/practice. dominate the EX200 exam! 4,500 exam dumps: pass your EX200 certification exam with CertBus. CertBus free certification EX200 exam | CertBus practice EX200 exams | CertBus test EX200 questions.

We CertBus has our own expert team. They selected and published the latest EX200 preparation materials from RedHat Official Exam-Center: https://www.certgod.com/EX200.html

Question 1:

There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network\’s Host.

Correct Answer: Check the anser in explanation.

vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart

2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 ONBOOT=yes BOOTPROTO=static IPADDR=X.X.X.X NETMASK=X.X.X.X GATEWAY=192.168.0.254 ifdown eth0 ifup eth0


Question 2:

Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.

Correct Answer: Check the anser in explanation.

# chkconfig autofs on # cd /etc/ # vim /etc/auto.master /rhome /etc/auto.ldap # cp auto.misc auto.ldap # vim auto.ladp ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40 * -rw,soft,intr 172.16.40.10:/rhome/and # service autofs stop # server autofs start # showmount -e 172.24.40.10 # su – ladpuser40


Question 3:

Create a backup file named /root/backup.tar.bz2, which contains the contents of /usr/local, bar must use the bzip2 compression.

Correct Answer: Check the anser in explanation.

cd /usr/local

tar -jcvf /root/backup.tar.bz2*

mkdir /test

tar -jxvf /root/backup.tar.bz2 -C /test/


Question 4:

Configure NTP.

Configure NTP service, Synchronize the server time, NTP server: classroom.example.com

Correct Answer: Check the anser in explanation.

Configure the client: Yum -y install chrony Vim /etc/chrony.conf Add: server classroom.example.com iburst Start: systemctl enable chronyd systemctl restart chronyd Validate: timedatectl status


Question 5:

You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don\’t know the root password. Change the root password to redhat and login in default Runlevel.

Correct Answer: Check the anser in explanation.

When you Boot the System, it starts on default Runlevel specified in /etc/inittab:

Id:?:initdefault:

When System Successfully boot, it will ask for username and password. But you don\’t know the root\’s password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the

boot loader.

1.

Restart the System.

2.

You will get the boot loader GRUB screen.

3.

Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s

4.

System will boot on Single User mode.

5.

Use passwd command to change.

6.

Press ctrl d


EX200 PDF DumpsEX200 Exam QuestionsEX200 Braindumps

Question 6:

Configure autofs to automount the home directories of LDAP users as follows:

host.domain11.example.com NFS-exports /home to your system.

This filesystem contains a pre-configured home directory for the user ldapuser11 ldapuser11\’s home directory is host.domain11.example.com /rhome/ldapuser11 ldapuser11\’s home directory should be automounted locally beneath /rhome

as /rhome/ldapuser11

Home directories must be writable by their users

ldapuser11\’s password is \’password\’.

Correct Answer: Check the anser in explanation.

vim /etc/auto.master /rhome /etc/auto.misc wq! # vim /etc/auto.misc ldapuser11 –rw,sync host.domain11.example.com:/rhome/ldpauser11 :wq! #service autofs restart

service autofs reload

chkconfig autofs on

su -ldapuser11 Login ldapuser with home directory # exit


Question 7:

Create a backup

Create a backup file named /root/backup.tar.bz2, contains the content of /usr/local, tar must use bzip2 to compress.

Correct Answer: Check the anser in explanation.

cd /usr/local tar –jcvf /root/backup.tar.bz2

mkdir /test tar –jxvf /root/backup.tar.bz2 –C /test// Decompression to check the content is the same as the /usr/loca after If the questions require to use gzip to compress. change –j to –z.


Question 8:

Who ever creates the files/directories on archive group owner should be automatically should be the same group owner of archive.

Correct Answer: Check the anser in explanation.

chmod g s /archive

Verify using: ls -ld /archive Permission should be like: drwxrws— 2 root sysuser 4096 Mar 16 18:08 /archive If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory. To set the SGID bit: chmod g s directory To Remove the SGID bit: chmod g-s directory


Question 9:

Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under /media/cdrom and which take effect automatically at boot-start.

Correct Answer: Check the anser in explanation.

# cd /root; wget ftp://192.168.0.254/pub/boot.iso # mkdir -p /media/cdrom # vim /etc/fstab /root/boot.iso /media/cdrom iso9660 defaults,loop 0 0 # mount -a mount [-t vfstype] [-o options] device dir


Question 10:

One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB. Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing any data. As well as size should be increased online.

Correct Answer: Check the anser in explanation.

The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal sized chunks known as Physical Extents (PE). As there are several

other concepts associated with the LVM system, let\’s start with some basic definitions:

Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.

Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.

Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.

Logical Volume (LV) is composed of a group of LEs. You can mount a file system such as /home and /var on an LV.

Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you\’ll use apply to a specific VG.

Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1

Verify the Size on mounted directory: df -h or df -h mounted directory name

Use: lvextend -L 400M /dev/vg0/lv1

ext2online -d /dev/vg0/lv1 to bring extended size online.

Again Verify using lvdisplay and df -h command.


CertBus exam braindumps are pass guaranteed. We guarantee your pass for the EX200 exam successfully with our RedHat materials. CertBus Red Hat Certified System Administrator – RHCSA exam PDF and VCE are the latest and most accurate. We have the best RedHat in our team to make sure CertBus Red Hat Certified System Administrator – RHCSA exam questions and answers are the most valid. CertBus exam Red Hat Certified System Administrator – RHCSA exam dumps will help you to be the RedHat specialist, clear your EX200 exam and get the final success.

EX200 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mZVBXc2xUejVzTUk/view?usp=sharing

EX200 RedHat exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/EX200.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection