CertBus 2021 Latest Microsoft 70-741 MCSA Exam VCE and PDF Dumps for Free Download!
☆ 70-741 MCSA Exam PDF and VCE Dumps : 299QAs Instant Download: https://www.certgod.com/70-741.html [100% 70-741 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 70-741 PDF: https://www.certgod.com/online-pdf/70-741.pdf
Following 70-741 299QAs are all new published by Microsoft Official Exam Center
This is a note. Please give me your attention if you are preparing for your Microsoft Latest 70-741 study guide exam. It is really a tough task to pass MCSA Newest 70-741 free download exam. However, CertBus will help you on that with the most comprehensive PDF and VCEs of the latest MCSA Newest 70-741 study guide exam questions, covering each and every aspect of MCSA Feb 21,2021 Newest 70-741 pdf Networking with Windows Server 2016 exam curriculum.
CertBus – clear all your 70-741 certification exams with CertBus study guide. 100% pass rate and money back guarantee. CertBus 70-741 exam certification prep online course training. association of certification 70-741 exam resources – CertBus. CertBus – leader of 70-741 certifications, latest dumps, guaranteed pass.
We CertBus has our own expert team. They selected and published the latest 70-741 preparation materials from Microsoft Official Exam-Center: https://www.certgod.com/70-741.html
Question 1:
A company named Contoso, Ltd has five Hyper-V hosts that are configured as shown in the following table.
What are two valid live migration scenarios for virtual machines in your environment?
A. from Sever1 to server5
B. from Server4 to Server 5
C. from Server2 to Server3
D. from Server3 to Server4
Correct Answer: AC
Question 2:
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
Users report that when they turn on their client computers, it takes a long time to access the network.
You validate that it takes a long time for the computers to receive an IP address from Server1.
You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.
You need to reduce the amount of time it takes for the computers to receive an IP address.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Correct Answer: A
Question 3:
Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and litwareinc.com.
Your company recently deployed DirectAccess for the members of a group named DA_Computers. All client computers are members of DA_Computers. You discover that DirectAccess clients can access the resources located in the contoso.com domain only. The clients can access the resources in the litwareinc.com domain by using an L2TP VPN connection to the network.
You need to ensure that the DirectAccess clients can access the resources in the litwareinc.com domain. What should you do?
A. From a Group Policy object (GPO), modify the Name Resolution Policy Table (NRPT).
B. From the properties of the servers in litwareinc.com, configure the delegation settings.
C. On an external DNS server, create a zone delegation for litwareinc.com.
D. Add the servers in litwareinc.com to the RAS and IAS Servers group.
Correct Answer: A
Question 4:
You have servers named Server1 and DHCP1. Both servers run Windows Server 2016.
DHCP1 contains an IPv4 scope named Scope1.
You have 1,000 client computers.
You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.
You install the DHCP Server server role on Server1.
What should you do next?
A. From the DHCP console, run the Configure Failover wizard.
B. From Server Manager, install the Network Load Balancing feature.
C. From Server Manager, install the Failover Clustering feature.
D. From the DHCP console, create a superscope.
Correct Answer: A
Question 5:
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while
others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Reconcile-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
Latest 70-741 Dumps70-741 VCE Dumps70-741 Practice Test
Question 6:
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?
A. YES
B. NO
Correct Answer: A
Question 7:
You have a server named Host1 that runs Windows Server 2016. You configure Host1 as a virtualization host and create 20 new virtual machines on Host1.
You need to ensure that all of the virtual machines can connect to the Internet through Host1.
Which three actions should you perform? Each correct answer presents part of the solution.
A. On a virtual machine, install the Remote Access server role.
B. From the properties of each virtual machine, enable virtual LAN identification.
C. From the properties of each virtual machine, connect to the virtual machine switch.
D. On Host1, configure the network address translation (NAT) network.
E. On Host1, create an internal virtual machine switch and specify an IP address for the switch.
Correct Answer: CDE
Question 8:
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is
enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have been
offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
Question 9:
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServertrustAnchor cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
Question 10:
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.
You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?
A. From the properties on the DNS zone, modify the refresh interval.
B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
Correct Answer: A
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-741 exam successfully with our Microsoft materials. CertBus Networking with Windows Server 2016 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Networking with Windows Server 2016 exam questions and answers are the most valid. CertBus exam Networking with Windows Server 2016 exam dumps will help you to be the Microsoft specialist, clear your 70-741 exam and get the final success.
70-741 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/70-741.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.
 |  |  |  |  | |
|---|---|---|---|---|---|
 |  | | |  | |
| Brand | Certbus | Testking | Pass4sure | Actualtests | Others |
| Price | $45.99 | $124.99 | $125.99 | $189 | $69.99-99.99 |
| Up-to-Date Dumps |  |  | | | |
| Free 365 Days Update | | | | | |
| Real Questions | | | | | |
| Printable PDF | | | | | |
| Test Engine | | | | | |
| One Time Purchase | | | | | |
| Instant Download | | | | | |
| Unlimited Install | | | | | |
| 100% Pass Guarantee | | | | | |
| 100% Money Back | | | | | |
| Secure Payment | | | | | |
| Privacy Protection | | | | | |