[Newest Version] Free CertBus Microsoft 70-743 PDF and Exam Questions Download 100% Pass Exam

CertBus 2020 Real Microsoft 70-743 MCSA Exam VCE and PDF Dumps for Free Download!

70-743 MCSA Exam PDF and VCE Dumps : 296QAs Instant Download: https://www.certbus.com/70-743.html [100% 70-743 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 70-743 PDF: https://www.certbus.com/online-pdf/70-743.pdf

Following 70-743 296QAs are all new published by Microsoft Official Exam Center

One of my colleague recommend me that CertBus MCSA Nov 19,2020 Latest 70-743 vce dumps dumps are effective and helpful. Thank goodness I followed up with him and choose CertBus as my assistance on my MCSA Newest 70-743 QAs Upgrading Your Skills to MCSA Windows Server 2016 certification exam! I passed my Microsoft MCSA Hotest 70-743 exam questions exam very easily. I was lucky, all my questions in the exams were from my Microsoft MCSA Newest 70-743 pdf dumps.

pass the 70-743 exam on your first attempt with CertBus! unlimited access to 3500 CertBus exams q and a. CertBus certification 70-743 practice exams. CertBus – latest update source for all 70-743 certification exams. CertBus – leader of 70-743 certifications, latest dumps, guaranteed pass. pass 70-743 certification exam with CertBus braindumps!

We CertBus has our own expert team. They selected and published the latest 70-743 preparation materials from Microsoft Official Exam-Center: https://www.certbus.com/70-743.html

Question 1:

You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two virtual machines named VM1 and VM2.

You discover that VM1 and VM2 can communicate with Server1 over the network.

You need to ensure that VM1 and VM2 can communicate with each other only. The solution must prevent VM1 and VM2 from communicating with Server1.

Which cmdlet should you use?

A. Enable-VMSwitchExtention

B. Set-NetNeighbor

C. Set-VMSwitch

D. Remove-VMSwitchTeamMember

Correct Answer: C

The virtual switch needs to be configured as an “Private” switch.

Question 2:

You have a server named Server1 that runs Windows Server 2016.

You need to install the DNS Server role on Server1.

What should you run?

A. the Install-Package cmdlet

B. the setup.exe command

C. the dnscmd.exe command

D. the Enable-WindowsOptionalFeature cmdlet

Correct Answer: D

Question 3:

You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.

The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.

You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.

Which command should you run? To answer, select the appropriate options in the answer area.

Hot Area:

Correct Answer:

Question 4:

You install a new Nano Server named Nano1. Nano1 is a member of a workgroup and has an IP address of

You have a server named Server1 that runs Windows Server 2016.

From Server1, you need to establish a Windows PowerShell session to Nano1.

How should you complete the PowerShell script? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to

view content.

Select and Place:

Correct Answer:

Question 5:

You have a network that contains several servers that run Windows Server 2016.

You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:

How should you configure the DSC recourses? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view


Select and Place:

Correct Answer:

70-743 PDF Dumps70-743 Study Guide70-743 Exam Questions

Question 6:

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10. On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4.

Server1 must resolve queries from all other DNS clients.

Solution: From Windows PowerShell on Server1, you run the Export-DnsServerDnsSecPublicKey cmdlet.

Does this meet the goal?

A. Yes

B. No

Correct Answer: B

Question 7:

You have a Nano Server named Nano1.

You deploy several containers to Nano1 that use an image named Image1.

You need to deploy a new container to Nano1 that uses Image1.

What should you run?

A. the Install-WindowsFeature cmdlet

B. the docker run command

C. the docker load command

D. the Install-NanoServerPackage cmdlet

Correct Answer: B

When an operator executes docker run, the container process that runs is isolated in that it has its own file system, its own networking, and its own isolated process tree separate from the host.

The basic docker run command takes this form:


Question 8:

You have two servers named Server1 and Server2. A firewall exists between Server1 and Server2. Both servers run Windows Server Update Services (WSUS). Server1 downloads updates from Microsoft update.

Server2 must synchronize updates from Server1.

Which port should to open on the firewall?

A. 80

B. 443

C. 3389

D. 8530

Correct Answer: D

Question 9:

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

Information and details provided in a question apply only to that question.

You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.

An iSCSI SAN connects to the network.

You create a LUN on the SAN and configure both servers to connect to the iSCSI target.

You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.

You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.

Which tool should you use?

A. the clussvc.exe command

B. the cluster.exe command

C. the Computer Management snap-in

D. the configurehyperv.exe command

E. the Disk Management snap-in

F. the Failover Cluster Manager snap-in

G. the Hyper-V Manager snap-in

H. the Server Manager app

Correct Answer: F


https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj863389.aspx

To implement certain scenarios for clustered virtual machines, the virtual machine storage and virtual hard disk file should be configured as Cluster Shared Volumes (CSV). To configure a disk in clustered storage as a CSV volume, you can use Failover Cluster Manager or the Windows PowerShellAdd-ClusterSharedVolume cmdlet. For detailed planning considerations and steps to create CSV, see Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster.

Question 10:

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. IPAM is configured to use the Group Policy based provisioning method. The prefix for the IPAM Group Policy objects (GPOs) is IP.

From Group Policy Management, you manually rename the IPAM GPOs to have a prefix of IPAM.

You need to modify the GPO prefix used by IPAM.

What should you do?

A. Click Configure server discovery in Server Manager.

B. Run the Set-IpamConfiguration cmdlet.

C. Run the Invoke-IpamGpoProvisioning cmdlet.

D. Click Provision the IPAM server in Server Manager.

Correct Answer: B

The Set-IpamConfiguration cmdlet modifies the configuration for the computer that runs the IPAM server.

The -GpoPrefix parameter specifies the unique Group Policy object (GPO) prefix name that IPAM uses to create the group policy objects. Use this parameter only when the value of the ProvisioningMethod parameter is set to Automatic. References: https://technet.microsoft.com/en-us/library/jj590816.aspx

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-743 exam successfully with our Microsoft materials. CertBus Upgrading Your Skills to MCSA Windows Server 2016 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Upgrading Your Skills to MCSA Windows Server 2016 exam questions and answers are the most valid. CertBus exam Upgrading Your Skills to MCSA Windows Server 2016 exam dumps will help you to be the Microsoft specialist, clear your 70-743 exam and get the final success.

70-743 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: https://www.certbus.com/70-743.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certbus.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand Certbus Testking Pass4sure Actualtests Others
Price $45.99 $124.99 $125.99 $189 $69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection

Author: CertBus