Posted in ITExam Archives, Microsoft Archives

[Newest Version] Free CertBus Microsoft 70-741 PDF and Exam Questions Download 100% Pass Exam

 Published Date: 09/18/2019

CertBus 2019 Valid Microsoft 70-741 MCSA Exam VCE and PDF Dumps for Free Download!

☆ 70-741 MCSA Exam PDF and VCE Dumps : 251QAs Instant Download: https://www.certgod.com/70-741.html [100% 70-741 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 70-741 PDF: https://www.certgod.com/online-pdf/70-741.pdf

Following 70-741 251QAs are all new published by Microsoft Official Exam Center

Do not worry about that if you are stuck in the MCSA Newest 70-741 free download exam difficulties, CertBus will assist you all your way through the MCSA Latest 70-741 QAs Networking with Windows Server 2016 exam with the most update MCSA Hotest 70-741 pdf dumps PDF and VCE dumps. CertBus exam Sep 18,2019 Latest 70-741 free download preparation materials are the most comprehensive material, covering every key knowledge of Newest 70-741 free download Networking with Windows Server 2016 exam.

CertBus – any 70-741 exam, 70-741 easy pass. CertBus – clear all your 70-741 certification exams with CertBus study guide. 100% pass rate and money back guarantee. CertBus 70-741 certification practice questions and answers. help candidates get well prepared for their 70-741 certification exams. pass your 70-741 exam in 1 day with CertBus.

We CertBus has our own expert team. They selected and published the latest 70-741 preparation materials from Microsoft Official Exam-Center: https://www.certgod.com/70-741.html

Question 1:

You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of 192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP address of

172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named Server2 that has an IP address of 192.168.1.79, You need to connect to the web application from Server2. To which IP address and port should you connect?

A. 172.16.5.6:80

B. 192.168.1.78:80

C. 172.16.5.6:84

D. 192.168.1.78:84

Correct Answer: A

Question 2:

You have servers named Server1 and DHCP1. Both servers run Windows Server 2016.

DHCP1 contains an IPv4 scope named Scope1.

You have 1,000 client computers.

You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.

You install the DHCP Server server role on Server1.

What should you do next?

A. From the DHCP console, run the Configure Failover wizard.

B. From Server Manager, install the Network Load Balancing feature.

C. From Server Manager, install the Failover Clustering feature.

D. From the DHCP console, create a superscope.

Correct Answer: A

Question 3:

Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2012.

The forest contains five domain controllers and five VPN servers that run Windows Server 2016.

Five hundred users connect to the VPN servers daily.

You need to configure a new server named Server1 as a RADIUS server.

What should you do first?

A. On Server1, deploy the Remote Access server role.

B. On Server1, deploy the Network Policy and Access Services role.

C. On a domain controller, set the forest functional level to Windows Server 2016.

D. On each VPN server, run the New-NpsRadiusClient cmdlet.

Correct Answer: B

Question 4:

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.

The London site contains a web server named Web1 that runs Windows Server 2016.

You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.

Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.

Does this meet the goal?

A. Yes

B. No

Correct Answer: A

Question 5:

Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link.

In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1.

In the Seattle office, you have a DFS server named FS2.

All servers run Windows Server 2016.

You configure replication of Folder1 to FS2.

Users in both offices frequently add files in Folder1.

You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.

You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1.

What should you do?

A. Modify the quota settings on Folder1 on FS2.

B. Modify the properties of the replication group.

C. Configure the copy of Folder1 on FS2 as read-only.

D. Modify the replicated folder properties of Folder1 on FS1.

Correct Answer: B

70-741 PDF Dumps70-741 Study Guide70-741 Braindumps

Question 6:

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is

exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets.

The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

What should you do to enable Server2 as a NAT server?

A. From Routing and Remote Access, add an interface.

B. From Windows PowerShell, run the New-RoutingGroupConnector cmdlet.

C. From Routing and Remote Access, add a routing protocol.

D. From Windows PowerShell, run the Install-WindowsFeature cmdlet.

Correct Answer: A

Question 7:

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is

exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets.

The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.

Which two actions should you perform? Each correct answer presents part of the solution.

A. Create a scheduled task that runs the Remove-Computer cmdlet.

B. Modify the Zone Aging/Scavenging Properties of the zone.

C. Modify the Time to live (TTL) value of the start of authority (SOA) record.

D. Set the Scavenging period of Server1.

E. Modify the Expires after value of the start of authority (SOA) record.

Correct Answer: BD

Question 8:

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.

Server1 is configured to allow domain users to establish VPN connections from 06:00 to

18:00

everyday of the week.

You need to ensure that domain users can establish VPN connections only between Monday and Friday.

Solution: From Routing and Remote Access, You configure the Properties of Server1.

Does this meet the goal?

A.

Yes

B.

No

Correct Answer: B

Question 9:

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.

You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal

connects to the internal network and is configured to use the 192.168.1.250 IP address.

You need to provide Internet connectivity for the client computers.

What should you do?

A. On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP console on Server1, authorize Server2.

B. On Server1, stop the DHCP server. On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).

C. On Server2 run the New-NetNat ame NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.

D. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.

Correct Answer: B

Question 10:

You have a DHCP server named Server1.

Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that

connect to Subnet 1 are rarely the same computers.

You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16.

You need to ensure that all of the computers can connect successfully to the network to access the Internet.

What should you do?

A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.

B. Modify the scope options.

C. Modify the lease duration.

D. Configure Network Access Protection (NAP) integration on the existing scope.

Correct Answer: A

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 70-741 exam successfully with our Microsoft materials. CertBus Networking with Windows Server 2016 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Networking with Windows Server 2016 exam questions and answers are the most valid. CertBus exam Networking with Windows Server 2016 exam dumps will help you to be the Microsoft specialist, clear your 70-741 exam and get the final success.

70-741 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/70-741.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection