Free Download the Most Update CertBus Microsoft 070-410 Brain Dumps

Do not worry about that if you are stuck in the 070-410 exam difficulties, CertBus will assist you all your way through the 070-410 Installing and Configuring Windows Server 2012 exam with the most update 070-410 PDF and VCE dumps. CertBus exam 070-410 preparation materials are the most comprehensive material, covering every key knowledge of 070-410 Installing and Configuring Windows Server 2012 exam.

We CertBus has our own expert team. They selected and published the latest 070-410 preparation materials from Microsoft Official Exam-Center: http://www.certgod.com/070-410.html

QUESTION NO:14

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS). You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.

Which virtual machine setting should you configure for VM2?

A. NUMA topology

B. Resource control

C. Resource metering

D. Virtual Machine Chimney

E. The VLAN ID

F. Processor Compatibility

G. The startup order

H. Automatic Start Action

I. Integration Services

J. Port mirroring

K. Single-root I/O virtualization

Correct Answer: G Section: (none)Explanation

Explanation/Reference:

Explanation:

G. Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first

http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx

QUESTION NO:1

You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed. The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.) You create a virtual machine on Server2 named VM1.

You need to ensure that you can configure a pass-through disk for VM1. What should you do?

A. Convert Disk 1 to a basic disk.

B. Take Disk 1 offline.

C. Create a partition on Disk 1.

D. Convert Disk 1 to a MBR disk.

Correct Answer: B Section: (none)Explanation

Explanation/Reference:

Explanation: http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks- inhyperv.aspx Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective

QUESTION NO:5

You install Windows Server 2012 R2 on a standalone server named Server1. You configure Server1 as a VPN server.

You need to ensure that client computers can establish PPTP connections to Server1. Which two firewall rules should you create? (Each correct answer presents

part of the solution.

Choose two.)

A. An inbound rule for protocol 47

B. An outbound rule for protocol 47

C. An inbound rule for TCP port 1723

D. An inbound rule for TCP port 1701

E. An outbound rule for TCP port 1723

F. An outbound rule for TCP port 1701

Correct Answer: AC Section: (none)Explanation

Explanation/Reference:

Explanation: To enable VPN tunnels between individual host computers or entire networks that have a firewall between them, you must open the following ports: PPTP To allow PPTP tunnel maintenance traffic, open TCP 1723. To allow PPTP tunneled data to pass through router, open Protocol ID 47. http:// www.windowsitpro.com/article/pptp/which-ports-do-you- need-to-open-on-a-firewall-to- allow-pptp-andl2tp-over-ipsec-vpn-tunnels–46811 If you use a personal firewall or a broadband router, or if there are routers or firewalls between the VPN client and the VPN server, the following ports and protocol must be enabled for PPTP on all firewalls and routers that are between the VPN client and the VPN server: Client ports Server port Protocol 1024-65535/TCP 1723/TCP PPTP Additionally, you must enable IP PROTOCOL 47 (GRE). http://support.microsoft.com/kb/314076/en-us

QUESTION NO:13

You have a server named Server1 that runs a full installation of Windows Server 2012 R2. You need to uninstall the graphical user interface (GUI) on Server1. You must achieve this goal by using the minimum amount of Administrative effort. What should you do?

A. Reinstall Windows Server 2012 R2 on the server.

B. From Server Manager, uninstall the User Interfaces and Infrastructure feature.

C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE

D. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.

Correct Answer: B Section: (none)Explanation

Explanation/Reference:

Explanation:

A. Not least effort

B. Quick and Easy

C. Uninstalls PS-ISE

D. Doesn\’t remove all GUI components

http://www.petri.co.il/switching-gui-server-core-windows-server-2012.htm

QUESTION NO:20

Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012

R2. All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts.

Servers are restarted only occasionally.

You need to identify which servers were restarted during the last two days.

What should you do?

A. Run dsquery computerand specify the -staiepwdpara meter.

B. Run Get-ADComputerand specify the SearchScope parameter.

C. Run Get-ADComputerand specify the IastLogonproperty.

D. Run dsquery serverand specify the -oparameter

Correct Answer: C Section: (none)Explanation

Explanation/Reference:

QUESTION NO:16

Your network contains an Active Directory domain named adatum.com. The domain contains three domain DC3 loses network connectivity due to a hardware failure. You plan to remove DC3 from the domain. You log on to DC3. You need to identify which service location (SRV) records are registered by DC3. What should you do?

A. Open the %windir%\system32\config\netlogon.dns file.

B. Run dcdiag /test:dns

C. Open the %windir%\system32\dns\backup\adatum.com.dns file.

D. Run ipconfig /displaydns.

Correct Answer: A Section: (none) Explanation

Explanation/Reference:

Explanation:

A. Netlogon service creates a log file that contains all the locator resource records and places the logfile in the following location:

B. Analyzes the state of domain controllers in a forest or enterprise and reports any problems to help introubleshooting.

C. dns backup file

D. used to display current resolver cache content You can verify SRV locator resource records by viewing netlogon.dns, located in the

%systemroot%\System32\Config folder.

The SRV record is a Domain Name System (DNS) resource record that is used to identify computers that hostspecific services.

SRV resource records are used to locate domain controllers for Active Directory.

You can use Notepad, to view this file.

The first record in the file is the domain controller\’s Lightweight Directory Access Protocol (LDAP) SRV record.

This record should appear similar to the following:

_ldap._tcp.Domain_Name

http://support.microsoft.com/kb/816587/en-us http://technet.microsoft.com/en-us/library/cc959303.aspx http://technet.microsoft.com/en-us/library/cc731968(v=ws.10).aspx

QUESTION NO:18

Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2. One of the domain controllers is

named DCI. The network contains a member server named Server1 that runs Windows Server 2012 R2. You need to promote Server1 to a domain controller by

using install from media (IFM).

What should you do first?

A. Create a system state backup of DC1.

B. Create IFM media on DC1.

C. Upgrade DC1 to Windows Server 2012 R2.

D. Run the Active Directory Domain Services Configuration Wizard on Server1.

E. Run the Active Directory Domain Services Installation Wizard on DC1.

Correct Answer: C Section: (none)Explanation

Explanation/Reference:

Explanation:

A. Backs up system state data to be restored

C. Only valid option. You could install ADDS role on Server 1 and run ADDS configuration wizard andadd DC to existing domain

D. Need to add ADDS role first

E. Wrong server Installation from media does not work across different operating system versions. In other words, you must use a Windows Server 2012 R2 domain controller to generate installation media to usefor another Windows Server 2012 R2 domain controller installation. We can use the Install from media (IFM) option to install an Additional Domain Controller in an existing domainis the best option such as a branch office scenario where network is slow, unreliable and costly. IFM will minimize replication traffic during the installation because it uses restored backup files to populate theAD DS database. This will significantly reduce the amount of traffic copied over the WAN link. Things to remember: If you are deploying your first Domain Controller in the domain, you cannot use IFM. The OS will need to match the IFM media. (If you create a 2008 R2 IFM, promote a 2008 R2 DC) If you are creating a DC that will be a Global Catalog Server, create your IFM on a Global Catalog Server. If you are creating a DC that will be a DNS Server, create your IFM on a DNS Server. If you want to copy the SYSVOL, the DC on which you generate the installation media and the new DC mustbe at least running Windows Server 2008 with Service Pack 2 or Windows Server 2008 R2. Membership of the Domain Admins group is the minimum required to complete IFM.

http://www.brandonlawson.com/active-directory/deploying-domain-controllers-with-installfrom- media-ifm/ http://technet.microsoft.com/en-us/library/jj574166.aspx http://technet.microsoft.com/en-us/library/cc770654(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj574134.aspx Media used by the IFM option is created with Windows Server Backup or Ntdsutil.exe from another existingWindows Server 2012 R2 computer only You cannot use a Windows Server 2008 R2 or previous operating system to create media for a Windows Server 2012 R2 domain controller.

QUESTION NO:17

Your network contains an Active Directory forest that contains three domains. A group named Group1 is configured as a domain local distribution group in the

forest root domain. You plan to grant Group1 read-only access to a shared folder named Share1. Share1 is located in a child domain.

You need to ensure that the members of Group1 can access Share1.

What should you do first?

A. Convert Group1 to a global distribution group.

B. Convert Group1 to a universal security group.

C. Convert Group1 to a universal distribution group.

D. Convert Group1 to a domain local security group

Correct Answer: B Section: (none) Explanation

Explanation/Reference:

Explanation:

A. Distribution Groups only used for email B, Universal can be used for any domain or forest

C. Distribution Groups only used for email

D. Permissions can be assigned only within the same domain as the parent domain local group Group scope Universal can be assigned permissions in any domain or forest.

http://technet.microsoft.com/en-us/library/cc781446(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx

QUESTION NO:21

Your network contains an Active Directory domain named contoso.com. You log on to a domain controller by using an account named Admin1. Admin1 is a member of the Domain Admins group. You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.) Group1 is located in an organizational unit (OU) named OU1.

You need to ensure that you can modify the Security settings of Group1 by using Active Directory Users and Computers. What should you do from Active Directory Users and Computers?

A. From the View menu, select Users, Contacts, Groups, and Computers as containers.

B. Right-click OU1 and select Delegate Control

C. From the View menu, select Advanced Features.

D. Right-click contoso.com and select Delegate Control.

Correct Answer: C Section: (none)Explanation

Explanation/Reference:

Explanation: From ADUC select view toolbar then select advanced features When you open up the ADUC in a default installation of Active Directory, you are only presented with the basiccontainers. These basic containers include the only organizational unit (OU), which is the Domain Controllers OU, as wellas the other containers such as Users and Computers. To see more in-depth containers, you need to configure the ADUC by going to the View option on thetoolbar, then selecting Advanced Features. This will refresh the view within the ADUC and add some new containers. There are no hidden (or Advanced)OUs that will show up when you configure the ADUC in this way. Viewing ADUC Advanced Settings:

http://searchwindowsserver.techtarget.com/tip/Viewing-advanced-settings-in-ActiveDirectory- Users-and-Computers

QUESTION NO:10

You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1. You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?

A. Create a storage pool.

B. Convert the disk to a dynamic disk.

C. Create a VHD, and then attach the VHD.

D. Convert the disk to a GPT disk.

Correct Answer: D Section: (none)Explanation

Explanation/Reference:

Explanation: MBR max is 2TB, the disk must be GPT For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest ofthe disk space will not be used unless you convert it to GPT. An existing MBR partition can\’t be converted to GPT unless it is completely empty; you must either deleteeverything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss. http://msdn.microsoft.com/en-us/library/windows/hardware/ gg463525.aspx

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 070-410 exam successfully with our Microsoft materials. CertBus Installing and Configuring Windows Server 2012 exam PDF and VCE are the latest and most accurate. We have the best Microsoft in our team to make sure CertBus Installing and Configuring Windows Server 2012 exam questions and answers are the most valid. CertBus exam Installing and Configuring Windows Server 2012 exam dumps will help you to be the Microsoft specialist, clear your 070-410 exam and get the final success.

070-410 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mNFBzbDFUSnlKRkU/view?usp=sharing

070-410 Microsoft exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/070-410.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection