This dump is 100% valid to pass Juniper JNCSP-SEC JN0-690 exam. The only tips is please do not just memorize the questions and answers, you need to get through understanding of it because the question changed a little in the real exam. Follow the instructions in the CertBus JNCSP-SEC JN0-690 Junos Troubleshooting PDF and VCEs. All CertBus materials will help you pass your Juniper JNCSP-SEC exam successfully.
We CertBus has our own expert team. They selected and published the latest JN0-690 preparation materials from Juniper Official Exam-Center: http://www.certgod.com/JN0-690.html
QUESTION NO: 9
Which operational command would be used to display diagnostic data and alarms for 1/10/100 Gigabit
Ethernet optical transceivers?
A. show interfaces extensive
B. show interfaces diagnostics optics
C. show chassis alarms
D. show interfaces controller
Correct Answer: B
Explanation
Explanation/Reference:
Explanation:
QUESTION NO: 5
Which operational CLI command would you use to display information about the system and software
processes?
A. show system
B. show chassis
C. show route
D. show cli
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
Show route will only show you routing, show system will show you software related information:
>show system ?
Possible completions:
alarms Show system alarm status
audit Show file system MD5 hash and permissions
auto-snapshot Show auto-snapshot status when system booted from alternate slice autoinstallation Show
autoinstallation information
autorecovery Show autorecovery information
boot-messages Show boot time messages
buffers Show buffer statistics
certificate Show installed X509 certificates
commit Show pending commit requests (if any) and commit history configuration Show configuration
information
connections Show system connection activity
core-dumps Show system core files
directory-usage Show local directory information
download Show status of downloads
firmware Show all firmware version information
health Show online diagnostic status
license Show feature licenses information
login Show system login state
memory Show system memory usage
processes Show system process table
queues Show queue statistics
reboot Show any pending halt or reboot requests
resource-cleanup Show resource cleanup information
rollback Show rolled back configuration
services Show service applications information
snapshot Show snapshot information
software Show loaded JUNOS extensions
statistics Show statistics for protocol
storage Show local storage data
threads Show system threads table
uptime Show time since system and processes started
users Show users who are currently logged in
virtual-memory Show kernel dynamic memory usage
QUESTION NO: 4
In the Junos OS, which type of file dumps the program\’s environment in the form of memory pointers,
instructions, and register data to a file in the event of a panic or other serious malfunction?
A. log file
B. backup file
C. configuration file
D. core file
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Junos will under a panic create a core-dump file, definitely not a backup file.
> show system core-dumps
/var/crash/*core*: No such file or directory
/var/tmp/*core*: No such file or directory
/var/tmp/pics/*core*: No such file or directory
/var/crash/kernel.*: No such file or directory
/tftpboot/corefiles/*core*: No such file or directory
QUESTION NO: 6
What is the name of the routing protocol process on a Junos OS device?
A. chassisd
B. snmpd
C. rpd
D. cosd
Correct Answer: C
Explanation
Explanation/Reference:
Explanation:
The Routing Process Deamon (RPD) handle Routing. COSD handle Class of service.
QUESTION NO: 2
Which CLI command applies the candidate configuration to the active configuration?
A. load
B. merge
C. copy run start
D. commit
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Copy run start is a Cisco specific command and is nowhere to be found in Junos.
>commit Commit current set of changes
QUESTION NO: 7
Which statement is correct about troubleshooting?
A. You must always have a complete understanding of the problem before you begin gathering any
information.
B. You must be sure the problem will be resolved before attempting a potential solution.
C. The problem must be reproducible before attempting a potential solution.
D. Establishing a network baseline is important to help understand when something is not working.
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
QUESTION NO: 3
Which operational CLI command would you use to troubleshoot hardware-related problems?
A. show system
B. show chassis
C. show route
D. show cli
Correct Answer: B
Explanation
Explanation/Reference:
Explanation:
Show route will only show you routing, show chassis will show you hardware related information.
>show chassis ?
Possible completions:
alarms Show alarm status
cluster Show chassis cluster information
craft-interface Show craft interface status
environment Show component status and temperature, cooling system speeds fan Show fan and fan tray
information
firmware Show firmware and operating system version for components forwarding Show forwarding
process (fwdd) status
fpc Show Flexible PIC Concentrator status
hardware Show installed hardware components
location Show physical location of chassis
mac-addresses Show media access control addresses
pic Show Physical Interface Card state, type, and uptime routing-engine Show Routing Engine status
temperature-thresholds Show chassis temperature threshold settings usb Show chassis USB status
QUESTION NO: 8
Which three steps are involved in troubleshooting any problem? (Choose three.)
A. Reboot the device.
B. Clearly define the problem.
C. Outline the expected behavior.
D. Determine who made the changes.
E. Isolate the problem.
Correct Answer: BCE
Explanation
Explanation/Reference:
Explanation:
QUESTION NO: 10
Which command would be helpful in determining the time at which the protocols started?
A. show route
B. show chassis hardware
C. show configuration
D. show system uptime
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
QUESTION NO: 1
Which CLI command is used to restart a software process?
A. restart
B. reboot
C. commit
D. reload
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
To restart a process one have to use restart , reboot is not even a valid command.
Possible completions:
restart Restart software process
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the JN0-690 exam successfully with our Juniper materials. CertBus Junos Troubleshooting exam PDF and VCE are the latest and most accurate. We have the best Juniper in our team to make sure CertBus Junos Troubleshooting exam questions and answers are the most valid. CertBus exam Junos Troubleshooting exam dumps will help you to be the Juniper specialist, clear your JN0-690 exam and get the final success.
JN0-690 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mTi1XSnZ6eDRUMm8/view?usp=sharing
JN0-690 Juniper exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/JN0-690.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.