Do not worry about your IBM Certified Systems Expert C4040-121 exam preparation? Hand over your problems to CertBus in change of the IBM Certified Systems Expert C4040-121 Virtualization Technical Support for IBM i -v1 certifications! CertBus provides the latest IBM IBM Certified Systems Expert C4040-121 exam preparation materials with PDF and VCEs. We CertBus guarantees you passing IBM Certified Systems Expert C4040-121 exam for sure.

We CertBus has our own expert team. They selected and published the latest C4040-121 preparation materials from IBM Official Exam-Center: http://www.certgod.com/C4040-121.html

QUESTION NO:4

A client IBM i 7.1 partition is being hosted by dual VIO Server partitions (VIOS-1 and VIOS-2).

A Shared Ethernet Adapter (SEA) has been created in order to provide Ethernet failover

capability for the IBM i partition. The IBM i partition will use the Ethernet resources of the

VIO Server partitions.

How many virtual Ethernet adapters need to be defined on the HMCI in the IBM i client,

and VIO Server partition profiles to support SEA and failover?

A. IBM i Client: 1 adapter:

VIOS-1: 1 adapter

VIOS-2: 1 adapter

B. IBM i Client: 2 adapters

VIOS-1: 1 adapter

VIOS-2: 1 adapter

C. IBM i Client: 1 adapter

VIOS-1: 2 adapters

VIOS-2: 2 adapters

D. IBM i Client: 2 adapters

VIOS-1: 2 adapters

VIOS-2: 2 adapters

Answer: C

QUESTION NO:8

Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What

type of adapter is required in the IBM i partition?

A. SAS disk adapter

B. Virtual SAS adapter

C. Virtual SCSI adapter

D. Fibre Channel adapter

Answer: C

QUESTION NO:19

9

Auditors have reviewed access to the HMC and determined that many users have too

much authority on the HMC. What is the correct method to restrict users to only a specific

set of resources?

A. Change the users’ task role to hmcoperator.

B. Create and assign a new task role that allows only the required set of tasks.

C. In Manage Users and Tasks, select each resource that is required for this user.

D. Create and assign a new resource role that allows access to only the required

resources.

Answer: D

QUESTION NO:7

A customer has purchased a new BladeCenter H (BCH) and POWER blade to run IBM i.

The POWER blade is configured with two Fibre Channel interlaces for attaching SAN and

tape.

They have an IBM TS3500 tape library with a fibre channel connection, and current

firmware is running through a fibre switch to another IBM i system. One port on the existing

switch and one port in the BCH fibre switch has been zoned to provide a connection from

the tape library to the BCH.

After IBM i 7.1 SLIC and base OS are installed on the blade from IBM distribution media,

the tape library does not appear in the device configuration.

What is the most likely cause of the problem?

4

A. The existing switch does not support NPIV.

B. NPIV enablement was omitted when configuring the BCH switch.

C. The BCH switch configuration must match the link speed of the TS3500.

D. A switch-to-switch cable is required. A switch to device cable was shipped with the BCH

by default.

Answer: A

QUESTION NO:14

After using the Advanced Management Module (AMM) to move the BladeCenter’s optical

drive to a different POWER blade in the same chassis, the VIO Server on the blade from

which the drive was removed still shows it as “available,” while the blade to which it was

moved doesn’t reflect ownership of the device. Why is this occurring?

A. The scheduled inventory refresh has not yet processed.

B. The IBM i partition which needs the optical device to be varied on with RESTART *YES

in order to be acquired.

C. The VIO Server which is acquiring the hardware doesn’t have an adapter available to

support optical virtualization.

D. The VIO Servers on each POWER blade need to have actions taken in order to refresh

the known inventory of physical hardware.

Answer: D

QUESTION NO:2

A customer has multiple POWERS 570 servers. The servers are controlled by multiple

HMCs. The customer is installing an additional Power 770 server in this environment but

will retain their existing HMCs. No updates to FSP or HMC levels have been made since

installation of the POWERS servers.

After reviewing the cover letters for ESP and HMC firmware levels, what updates are

required to support the addition of the new server into the network?

A. Update only the HMCs to the latest version.

B. Update only the FSPs to the latest release available.

C. Update the FSP5 and HMC5 of the existing systems to the minimum level required.

D. Update the POWERS ESPs to the most recent version available for the installed

firmware release. Update the HMCs to the most recent release available.

Answer: C

QUESTION NO:15

A customer would like to implement a client Linux partition on their Power Systems server.

There are no available physical network ports on the system.

In addition to configuring the virtual Ethernet adapters in a hosting IBM i partition, what

must be configured to allow the client Linux partition to access the network?

A. Schowler routes

7

B. Promiscuous mode

C. Link aggregation

D. Network address translation

Answer: D

QUESTION NO:9

A POWER7 system has 6 IBM i partitions sharing a single shared processor pool. The

system has 3 IBM i operating system licenses. Without exceeding the licenses available,

what is the largest allowable value for the “Maximum processing units” setting in the shared

processor pool?

A. 1

B. 2

C. 3

D. 6

Answer: C

QUESTION NO:6

A customer wants two VIO Servers in the CEO of a proposed Power 720. To provide

redundancy for the IBM V7000 SAN they will utilize to provision disk for his client partitions.

What is the minimum required to make this possible?

A. A 6-disk storage backplane

B. An 8-disk storage backplane

C. A 6-disk storage backplane and the split drive bay feature

D. An 8-disk storage backplane and the split drive bay feature

Answer: C

QUESTION NO:1

A customer needs two client IBM i partitions on a 4-core Power 720, with storage hosted by

VIO Server. What is the least expensive method to manage this environment?

A. HMC

B. Virtual Partition Manager

C. Integrated Virtualization Manager

D. Systems Director Navigator for PowerVM

Answer: C

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the C4040-121 exam successfully with our IBM materials. CertBus Virtualization Technical Support for IBM i -v1 exam PDF and VCE are the latest and most accurate. We have the best IBM in our team to make sure CertBus Virtualization Technical Support for IBM i -v1 exam questions and answers are the most valid. CertBus exam Virtualization Technical Support for IBM i -v1 exam dumps will help you to be the IBM specialist, clear your C4040-121 exam and get the final success.

C4040-121 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mM1BiZGQzcXUzeVU/view?usp=sharing

C4040-121 IBM exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/C4040-121.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection