Latest CertBus 300-165 Exam 300-165 Dumps 100% Free Download

CertBus 2020 Newest Cisco 300-165 CCNP Data Center Exam VCE and PDF Dumps for Free Download!

300-165 CCNP Data Center Exam PDF and VCE Dumps : 328QAs Instant Download: [100% 300-165 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 300-165 PDF:

Following 300-165 328QAs are all new published by Cisco Official Exam Center

Do not worry about your CCNP Data Center Hotest 300-165 practice exam preparation? Hand over your problems to CertBus in change of the CCNP Data Center Newest 300-165 pdf Implementing Cisco Data Center Infrastructure certifications! CertBus provides the latest Cisco CCNP Data Center May 08,2020 Latest 300-165 study guide exam preparation materials with PDF and VCEs. We CertBus guarantees you passing CCNP Data Center Hotest 300-165 vce exam for sure.

CertBus – leading source of 300-165 certification exam learning/practice. 4,500 exam dumps: pass your 300-165 certification exam with CertBus. CertBus – the most professional provider of all 300-165 certifications. pass all the 300-165 exam easily. CertBus – 300-165 certification with money back assurance. CertBus – best 300-165 training and certification computer-based-training online resources.

We CertBus has our own expert team. They selected and published the latest 300-165 preparation materials from Cisco Official Exam-Center:

Question 1:

Which feature must be enabled for Cisco TrustSec FC Link Encryption to work on a Cisco MDS 9000 Series Switch?

A. crypto IKE

B. port security



Correct Answer: D

Question 2:

What mode is required on a Cisco Nexus 7000 32-port 10-GB module port group to allow equal access to the 10-GB port controller?

A. dedicated

B. assigned

C. shared

D. community

Correct Answer: C

You can share 10 Gb of bandwidth among a group of ports (four ports) on a 32-port 10- Gigabit Ethernet module. To share the bandwidth, you must bring the dedicated port administratively down, specify the ports that are to share the bandwidth, change the rate mode to shared, and then bring the ports administratively up.

Reference: os/interfaces/configuration/guide/if_cli/if_basic.html#70242

Question 3:

Refer to the exhibit.

This multilayer Cisco Nexus switch had been the active virtual gateway for Group 1 before it became temporarily unavailable. What will happen to GLBP Group 1 when this device becomes available again?

A. The currently active router remains active.

B. It depends on the priority value that is configured active on the router.

C. The Cisco Nexus switch becomes the active virtual gateway after 600 seconds.

D. It depends on the weighting values that are configured active on the router.

Correct Answer: A

GLBP prioritizes gateways to elect an active virtual gateway (AVG). If multiple gateways have the same priority, the gateway with the highest real IP address becomes the AVG. The AVG assigns a virtual MAC address to each member of the GLBP group. Each member is the active virtual forwarder (AVF) for its assigned virtual MAC address, forwarding packets sent to its assigned virtual MAC address.

The AVG also answers Address Resolution Protocol (ARP) requests for the virtual IP address. Load sharing is achieved when the AVG replies to the ARP requests with different virtual MAC addresses.

Note: Packets received on a routed port destined for the GLBP virtual IP address terminate on the local router, regardless of whether that router is the active GLBP router or a redundant GLBP router. This termination includes ping and Telnet traffic. Packets received on a Layer 2 (VLAN) interface destined for the GLBP virtual IP address terminate on the active router.

Question 4:

Which command specifies a load-balancing method based on the MAC address of a host where the same forwarder is always used for a particular host while the number of GLBP group members remains unchanged?

A. load-balancing host-dependent

B. load-balancing mac-pinning

C. load-balancing round-robin

D. load-balancing weighted

Correct Answer: A

Question 5:

Which two options are limitations of NetFlow Version 5? (Choose two.)

A. no support for IPv6, Layer 2, or MPLS fields

B. fixed field specifications

C. excessive network utilization

D. analyzes all packets on the interface

Correct Answer: AB

Latest 300-165 Dumps300-165 PDF Dumps300-165 VCE Dumps

Question 6:

You are connecting a Cisco Nexus 2300 Series FEX to a Cisco Nexus 5600 Series parent switch. Which command should you use to configure the interfaces on the Nexus switch that connects to the FEX?

A. switch(config-if)# switchport mode f

B. switch(config-if)# switchport mode fex-fabric

C. switch(config-if)# switchport mode fabricpath

D. switch(config-if)# switchport mode vntag

Correct Answer: B

Explanation: References:

Question 7:

Which two items are services that are provided by Cisco Fabric Services? (Choose two.)

A. device alias distribution

B. VLAN database distribution

C. Kerberos proxy distribution

D. RSA key pair distribution

E. DPVM configuration distribution

Correct Answer: AE

The device alias application uses the Cisco Fabric Services (CFS) infrastructure to enable efficient database management and distribution. Device aliases use the coordinated distribution mode and the fabric-wide distribution scope. DPVM

can use CFS to distribute the database to all switches in the fabric. This allows devices to move anywhere and keep the same VSAN membership. You should enable CFS distribution on all switches in the fabric. Using the CFS infrastructure,

each DPVM server learns the DPVM database from each of its neighboring switches during the ISL bring-up process. If you change the database locally, the DPVM server notifies its neighboring switches, and that database is updated by all

switches in the fabric.

Reference: e/cli/CLIConfigurationGuide/ddas.html and os/san_switching/configuration/guide/b_Cisco_Nexus_7000_NX- OS_SAN_Switching_Configuration_Guide/Cisco_Nexus_7000_NXOS_SAN_Switching_Configuration_Guide_chapter4.html#concept_2B83E16506C845B39 BDF96F9CAFFAEC3

Question 8:


The following four questions concern the Nexus 7010\’ s which are configured as a vPC pair at the core of a Data Center network. You can utilize all the available show commands to answer the Questions Access to the running-configuration

is not allowed.


Enter NX-OS commands on 7K-3 and 7K-4 to verity network operation and answer four multiple-choice questions


Click on the switch to gain access to the console of the switch. No console or enable passwords are required.

To access the multiple-choice questions, click on the numbered boxes on the loft of the top panel.

There are four multiple-choice questions with this task Be sure to answer all four questions before selecting the Next button

Topology: Within the vpc configuration of the 7K\’s. the command peer-switch is configured. What is the result of enabling this command\’?

A. Both vPC peers use the same STP root ID

B. The vPC primary switch (7K-4 in this case) also serves as the STP root to improve vPC convergence

C. The vPC secondary switch (7K-3 in this case) serves as the STP root to improve vPC performance

D. Allows 7K-3 to act as the active HSRP gateway for packets that are addressed to the MAC address of 7K-4

E. Automatically disables IP redirects on all interface VUANs mapped over a vPC VLAN to avoid generation of IP redirect messages for packets switched through the vPC peer gateway router

F. Enables faster convergence of ARP tables after the vPC peer link flaps

Correct Answer: A

Question 9:

In policy-based routing, which action is taken for packets that do not match any of the route-map statements?

A. forwarded after the egress queue empties on the outbound interface

B. forwarded using the last statement in the route map

C. forwarded using the closest matching route-map statement

D. forwarded using destination-based routing

Correct Answer: D

Each entry in a route map contains a combination of match and set statements. The match statements define the criteria for whether appropriate packets meet the particular policy (that is, the conditions to be met). The set clauses explain

how the packets should be routed once they have met the match criteria.

You can mark the route-map statements as permit or deny. You can interpret the statements as follows:

?If the statement is marked as permit and the packets meet the match criteria, the set clause is applied. One of these actions involves choosing the next hop. ?If a statement is marked as deny, the packets that meet the match criteria are sent

back through the normal forwarding channels, and destination-based routing is performed. ?If the statement is marked as permit and the packets do not match any route-map statements, the packets are sent back through the normal

forwarding channels, and destination-based routing is performed.

Reference: x/unicast/configuration/guide/l3_cli_nxos/l3pbr.pdf

Question 10:

Which LISP component provides connectivity between LISP and non-LISP sites?

A. a map resolver

B. a proxy ETR

C. a proxy ITR

D. an ALT

Correct Answer: C

Explanation: References:

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 300-165 exam successfully with our Cisco materials. CertBus Implementing Cisco Data Center Infrastructure exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Implementing Cisco Data Center Infrastructure exam questions and answers are the most valid. CertBus exam Implementing Cisco Data Center Infrastructure exam dumps will help you to be the Cisco specialist, clear your 300-165 exam and get the final success.

300-165 Cisco exam dumps (100% Pass Guaranteed) from CertBus: [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand Certbus Testking Pass4sure Actualtests Others
Price $45.99 $124.99 $125.99 $189 $69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection

Author: CertBus