[Newest Version] Easily Pass 300-135 Exam with CertBus Updated Real Cisco 300-135 Exam Materials

CertBus 2019 Hottest Cisco 300-135 CCNP Routing and Switching Exam VCE and PDF Dumps for Free Download!

300-135 CCNP Routing and Switching Exam PDF and VCE Dumps : 442QAs Instant Download: https://www.certbus.com/300-135.html [100% 300-135 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 300-135 PDF: https://www.certbus.com/online-pdf/300-135.pdf
☆ CertBus 2019 Hottest 300-135 CCNP Routing and Switching exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mQ0lQeGs5a2R2Y0U/view?usp=sharing

Following 300-135 442QAs are all new published by Cisco Official Exam Center

CertBus provides the most up to date and accurate preparing materials of the CCNP Routing and Switching Latest 300-135 exam questions certification exam Q and A , testing software, exam PDF and VCE files to help you prepare your CCNP Routing and Switching Dec 27,2019 Hotest 300-135 study guide Troubleshooting and Maintaining Cisco IP Networks exam. What training you are looking for? Come to visit our site and choose CertBus online certification materials, you will get a quick and cost-efficient way to become a Cisco CCNP Routing and Switching certified professional in IT industry.

CertBus – help you to get your 300-135 certification more easily. save your time and money! high pass rate! CertBus- reliable 300-135 certifications expert on 300-135 exam study guide providing. CertBus – pass all 300-135 certification exams easily with our real exam practice. latest update and experts revised.

We CertBus has our own expert team. They selected and published the latest 300-135 preparation materials from Cisco Official Exam-Center: https://www.certbus.com/300-135.html

Question 1:

The following commands are issued on a Cisco Router:

Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1 Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1 Router(configuration)#exit Router#debug ip packet 199

What will the debug output on the console show?

A. All IP packets passing through the router

B. Only IP packets with the source address of 10.1.1.1

C. All IP packets from 10.1.1.1 to 172.16.1.1

D. All IP Packets between 10.1.1.1 and 172.16.1.1

Correct Answer: D

In this example, the “debug ip packet” command is tied to access list 199, specifying which IP packets should be debugged. Access list 199 contains two lines, one going from the host with IP address 10.1.1.1 to 172.16.1.1 and the other specifying all TCP packets from host 172.16.1.1 to 10.1.1.1.


Question 2:

A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. Which of statement is true regarding STP issue identified with switches in the given topology?

A. Loopguard configured on the New_Switch places the ports in loop inconsistent state

B. Rootguard configured on SW1 places the ports in root inconsistent state

C. Bpduguard configured on the New_Switch places the access ports in error-disable

D. Rootguard configured on SW2 places the ports in root inconsistent state

Correct Answer: A

On the new switch, we see that loopguard has been configured with the “spanning-tree guard loop” command.

The loop guard feature makes additional checks. If BPDUs are not received on a non-designated port, and loop guard is enabled, that port is moved into the STP loop- inconsistent blocking state, instead of the listening / learning / forwarding

state. Without the loop guard feature, the port assumes the designated port role.

The port moves to the STP forwarding state and creates a loop.


Question 3:

Which of the following topology situations would be a qood candidate for configuring DMVPN?

A. Extranet VPN

B. Managed overlay VPN topology

C. Hub-and-spoke VPN topology

D. Central-site VPN topology

E. Full mesh VPN topology

F. Remote-access VPN topology

Correct Answer: E


Question 4:

Which two options about GRE keepalives are true? (Choose two)

A. enabled by default

B. supports on point-to-point GRE tunnel interface

C. supports on point to multi-point mGRE

D. supported in VRFs only if fVRF and iVRF match

E. Support broadcas

F. support broadcast multicast

Correct Answer: BD


Question 5:

A question related to VPN. (VPN related question.)

A. create an ACL for protocol 47

B. https://www.CertBus.com/300-135.html

Correct Answer: A


300-135 PDF Dumps300-135 VCE Dumps300-135 Practice Test

Question 6:

what is the command to check the crypto RSA key

A. crypto key generate rsa

B. show crypto key mypubkey rsa

C. http://www.CertBus.com/300-135.html

D. http://www.CertBus.com/300-135.html

Correct Answer: B


Question 7:

===============================================================================

Client is unable to ping IP 209.65.200.241

Solution

Steps need to follow as below:

When we check on client 1 and Client 2 desktop we are not receiving DHCP address from R4 Ipconfig —– Client will be receiving IP address 10.2.1.3

IP 10.2.1.3 will be able to ping from R4 , R3, R2 but not from R1

Check for neighborship of ospf sh ip ospf nei —– Only one neighborship is forming with R2 and i.e. with R3 Since R2 is connected to R1 and R3 with routing protocol ospf than there should be 2 neighbors seen but only one is seen

Need to check running config of R2 and R3 for interface Sh run ————————– Interface Serial0/0/0/0.12 on R2

Sh run ————————– Interface Serial0/0/0/0 on R1 Change required: On R1, for IPV4 authentication of OSPF command is missing and required to configure—— ip ospf authentication message-digest

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241.

After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the

209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Correct Answer: A

On R1, for IPV4 authentication of OSPF the command is missing and required to configure—— ip ospf authentication message-digest

As you will see, the problem in this situation is with OSPF on R1. It is missing the “ip ospf authentication message-digest” command on the Serial0/0/0/0.12 interface.


Question 8:

===============================================================================

Solution

Steps need to follow as below:

Since the problem is raised that DSW1 will not become active router for HSRP group 10

we will check for the HSRP configuration…

DSW1

DSW2

From snapshot we see that the track command given needs to be changed under active VLAN10 router

Change Required: On DSW1, related to HSRP, under vlan 10 change the given track 1 command to instead use the track 10 command.

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241.

After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP

group 10.

Use the supported commands to isolated the cause of this fault and answer the following questions.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Correct Answer: E

DSW references the wrong track ID number.

In this case we know that the problem is with HSRP and that DSW1 will not become the active router. Since we know that HSRP communication is working between DSW1 and DSW2, we can deduce that the problem must be with DSW1.


Question 9:

=============================================================================== Solution

Steps need to follow as below:

When we check on client 1 and Client 2 desktop we are not receiving DHCP address from R4 ipconfig —– Client will be receiving Private IP address 169.254.X.X

From ASW1 we can ping 10.2.1.254….

On ASW1 VLAN10 is allowed in trunk and access command will is enabled on interface but DHCP IP address is not recd.

On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 and the problem is with DHCP

The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241.

After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the

209.65.200.241 address.

Use the supported commands to isolate the cause of this fault and answer the following question.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Correct Answer: D

On R4 the DHCP IP address is not allowed for network 10.2.1.0/24 which clearly shows the problem lies on R4 and the problem is with DHCP.

Since Client1 is getting ip address 169.x.x.x, there may be problem in DHCP. On closer look into the DHCP configuration on DHCP Server i.e R4 you get ip dhcp excluded-address command has wrongly configured. So the fault condition is

located on R4.


CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 300-135 exam successfully with our Cisco materials. CertBus Troubleshooting and Maintaining Cisco IP Networks exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Troubleshooting and Maintaining Cisco IP Networks exam questions and answers are the most valid. CertBus exam Troubleshooting and Maintaining Cisco IP Networks exam dumps will help you to be the Cisco specialist, clear your 300-135 exam and get the final success.

300-135 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mQ0lQeGs5a2R2Y0U/view?usp=sharing

300-135 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certbus.com/300-135.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certbus.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand Certbus Testking Pass4sure Actualtests Others
Price $45.99 $124.99 $125.99 $189 $69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection

Author: CertBus