Easily Pass 352-001 Exam with CertBus Latest Cisco 352-001 Study Materials

CertBus 2019 Valid Cisco 352-001 CCDE Exam VCE and PDF Dumps for Free Download!

352-001 CCDE Exam PDF and VCE Dumps : 705QAs Instant Download: https://www.certbus.com/352-001.html [100% 352-001 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 352-001 PDF: https://www.certbus.com/online-pdf/352-001.pdf
☆ CertBus 2019 Valid 352-001 CCDE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mTUFOZm5MQWgzUkE/view?usp=sharing

Following 352-001 705QAs are all new published by Cisco Official Exam Center

How to pass Hotest 352-001 vce exam easily with less time? CertBus provides the most valid Newest 352-001 vce dumps exam preparation material to boost your success rate in Cisco CCDE Nov 04,2019 Latest 352-001 QAs Cisco Certified Design Expert Qualification Exam exam. If you are one of the successful candidates with CertBus Newest 352-001 practice PDF and VCEs, do not hesitate to share your reviews on our Cisco CCDE materials.

CertBus – latest update source for all 352-001 certification exams. CertBus – help you to pass all 352-001 certification exams! CertBus 100% latest and accurate real 352-001 exam questions and answers. get all 352-001 certification easily! CertBus | 352-001 certification materials | videos | study guides. reliable 352-001 certification exams preparation – latest braindumps at CertBus.

We CertBus has our own expert team. They selected and published the latest 352-001 preparation materials from Cisco Official Exam-Center: https://www.certbus.com/352-001.html

Question 1:

As part of the security protocol for your network design, you have designated that option 82 is enabled for DHCP snooping. When option 82 is enabled, which information will be added to the DHCP request?

A. switch MAC address and VLAN, module, and port

B. remote ID and circuit ID

C. switch IP address and VLAN, module, and port

D. switch MAC address and switch IP address

Correct Answer: A

Question 2:

You are the lead IP/MPLS network designer of a service provider called XYZ. You are leading a design discussion regarding IPv6 implementation in the XYZ MPLS network, using MPLS 6PE/6VPE techniques. Currently, XYZ provides IPv4 multicast services over an MPLS network by using MVPN, and would like to provide parallel IPv6 multicast services. Which three multicast solutions should be enabled? (Choose three.)

A. native IPv6, only for multicast services

B. MPLS 6PE/6VPE, because it provides IPv6 multicast support by default

C. an overlay model using Layer 2 MPLS tunnels

D. PIM-DM to enable IPv6 multicast in conjunction with MPLS 6PE/6VPE

E. MVPN for IPv6 multicast service

Correct Answer: ACE

Question 3:

Your company plans to implement an Internet gateway router that is performing NAT. This same gateway will be terminating various IPsec tunnels to other remote sites. Which address type is appropriate for the ACL that will govern the sources of traffic entering the tunnel in the inside interface?

A. inside local

B. inside global

C. outside local

D. outside global

Correct Answer: B

Question 4:

Refer to the exhibit.

The routers in this network are all running EIGRP. What is the most important step to take in order to ensure that this network core will converge quickly should a link failure occur?

A. make certain EIGRP is running across all links

B. make certain EIGRP is not running across non-transit links

C. make certain the maximum number of paths on both of the routers is two

D. add another link between the two routers with no servers and set the metric on this new link equal to the other four links

Correct Answer: B

Question 5:

Refer to the exhibit.

Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP are configured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose three.)

A. Use loop guard on access ports.

B. Use PortFast on access ports.

C. Use root guard on access ports.

D. Align Layer 2 and Layer 3 forwarding paths.

E. Use BPDU Skew Detection on access ports.

F. Explicitly determine root and backup root bridges.

Correct Answer: BDF

Latest 352-001 Dumps352-001 Study Guide352-001 Exam Questions

Question 6:

Which design concern should be accounted for in all Layer 3 virtualization technologies?

A. Layer 3 redundancy

B. packet sizing

C. application usage

D. Layer 3 stability

Correct Answer: B

Question 7:

Refer to the exhibit.

How would you adjust the design to improve convergence on the network?

A. Add an intra-POP link between routers 1A and 1B, and enable IP LFA FRR.

B. Use an IP SLA between the end stations to detect path failures.

C. Enable SSO-NSF on routers 1A and 1B.

D. Use BGP to connect the sites over the WAN.

Correct Answer: A

Question 8:

You are evaluating convergence characteristics of various interior gateway protocols for a new network design.

Which technology allows link-state routing protocols to calculate paths to destination prefixes that are functionally similar to feasible successors in Enhanced Interior Gateway Routing Protocol?

A. Incremental Shortest Path First

B. Cisco Multiprotocol Label Switching Traffic Engineering Fast Reroute

C. Loop-Free Alternate Fast Reroute

D. partial route calculation

E. Fast-Flooding

Correct Answer: C

Question 9:

Which two statements accurately describe QoS in MPLS VPN (RFC 2547bis) networks? (Choose two.)

A. MPLS QoS is a scalable and simple solution because it only requires application at the Edge-LSR.

B. MPLS can force packets into specific paths and bandwidths based on Edge-LSR mapping of DSCP to EXP.

C. DiffServ information must be made known to the LSR in the MPLS header using the EXP field.

D. On egress from the Edge-LSR, the EXP field is used for PHB QoS towards the CE.

Correct Answer: BC

Question 10:

How are community formats sent in SNMPv1 and SNMPv2c?

A. In both protocols they are encrypted.

B. In both protocols they are sent as clear text.

C. In SNMPv1 they are sent as clear text and in SNMPv2c they are encrypted.

D. In SNMPv1 they are sent as clear text and in SNMPv2c they are sent as part of an encrypted session.

Correct Answer: B

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 352-001 exam successfully with our Cisco materials. CertBus Cisco Certified Design Expert Qualification Exam exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Cisco Certified Design Expert Qualification Exam exam questions and answers are the most valid. CertBus exam Cisco Certified Design Expert Qualification Exam exam dumps will help you to be the Cisco specialist, clear your 352-001 exam and get the final success.

352-001 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mTUFOZm5MQWgzUkE/view?usp=sharing

352-001 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certbus.com/352-001.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certbus.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand Certbus Testking Pass4sure Actualtests Others
Price $45.99 $124.99 $125.99 $189 $69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection

Author: CertBus