[Free] Download the Latest Cisco 400-101 Real Test Materials

CertBus 2019 Latest Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!

400-101 CCIE Exam PDF and VCE Dumps : 102QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2019 Latest 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing

Following 400-101 102QAs are all new published by Cisco Official Exam Center

This dump is 100% valid to pass Cisco CCIE Latest 400-101 free download exam. The only tips is please do not just memorize the questions and answers, you need to get through understanding of it because the question changed a little in the real exam. Follow the instructions in the CertBus CCIE Jun 22,2019 Newest 400-101 pdf CCIE Routing and Switching Written Exam PDF and VCEs. All CertBus materials will help you pass your Cisco CCIE exam successfully.

CertBus – Cisco dumps, braindumps, certification 400-101 exam dumps. pass 400-101 exam | 400-101 written test | 400-101 exam study guide | 400-101 exam tips. 400-101 study material, practice exam for the 400-101 certification. CertBus free certification 400-101 exam | CertBus practice 400-101 exams | CertBus test 400-101 questions.

We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html

Question 1:

What are two prerequisites for configuring Cisco Performance Monitor for IPv4 traffic? ( Choose two)

A. Cisco Express Forwarding or distributed Cisco Express Forwarding must be enabled on the interface

B. Conditional debugging must be enabled on the router

C. Authenticated connection must be configured for at least one Syslog destination

D. IPv4 routing must be configured on the router

E. Netflow must be enabled on the interface

Correct Answer: AD


Question 2:

Which statement about STP port states is true?

A. Listening and learning are transitory port states that use the forward delay timer

B. A port in the blocking state remains in that state for 30 seconds before transitioning to the listening state

C. A port in the blocking state remains in that state for 30 seconds before transitioning to the listening state

D. When a port transitions to the listening state, it can send receive data frames

Correct Answer: A


Question 3:

Refer to the exhibit. Which two statements can this output verify? (Choose two)

A. The device will tear down and restart its EIGRP process in 24 seconds

B. The device must receive an EIGRP packet within 24 seconds to maintain a neighbor relationship.

C. The EIGRP neighbor has been up for 28 ms

D. The device will wait 200 ms before retransmitting an EIGRP packet

E. The EIGRP neighbor has been up for 28 secs

F. The device must receive an EIGRP packet within 28 seconds to maintain a neighbor relationship.

Correct Answer: DE


Question 4:

Which two methods are used to configure an RP in a PIM-SM network? (Choose Two)

A. Auto-RP

B. anycast

C. SSM

D. PIM-DM

E. BSR

Correct Answer: AE


Question 5:

Refer to the exhibit. If the given network is in the process of being migrated from EIGRP to OSPF, includes external routes and all routers are currently running both protocols, what action must you perform to complete the migration?

A. Change the OSPF administrative distance to 91, wait until all routers are present, and then change it back to the default value.

B. Change the EIGRP administrative distance to 111, wait until all routers are present, and then change it back to the default value.

C. Change the EIGRP Administrative distance to match the OSPF Admin distance, wait until all routers are present, and then change the EIGRP Admin distance back to the default value

D. Change the OSPF Administrative distance to 171, wait until all routers are present and then change it back to the default value.

Correct Answer: D


400-101 VCE Dumps400-101 Study Guide400-101 Exam Questions

Question 6:

Which prefix list matches and permits all RFC 1918 network 10.0.0.0 routes that have masks of /16 through /24?

A. ip prefix-list foo seq 10 permit 10.0.0.0/8 ge 15 le 25

B. ip prefix-list foo seq 10 permit 10.0.0.0/8 ge 16 le 24

C. ip prefix-list foo seq 10 permit 10.0.0.0/16 le 24

D. ip prefix-list foo seq 10 permit 10.0.0.0/16 ge 15 le 25

Correct Answer: B


Question 7:

Which LSA type is associated with default route in a totally stubby area?

A. Router LSA(Type 1)

B. Autonomous system external LSA (Type 5)

C. Interarea-router LSAs for ASBRs (Type 4)

D. Interarea-prefix LSA for ABRs (Type 3)

Correct Answer: D


Question 8:

What are two differences between IPv6 ISATAP tunnelling and IPv6 6to4 tunneling ? (Choose Two)

A. Only ISATAP tunneling can transfer IPv6 multicast packets.

B. Only 6t4 tunneling requires 2002::/16 addresses.

C. Only ISATAP tunneling transfers unicast IPv6 packets within a site.

D. Only 6to4 tunneling transfers unicast IPv6 packets with a site

E. Only ISATAP tunneling transfers unicast IPv6 packets between sites.

Correct Answer: BC


Question 9:

Which statement about MAC authentication bypass is true?

A. It can initiate after 802.1X authentication times out

B. It relies on Cisco Discovery Protocol to learn MAC addresses

C. It authenticates by using MAC addresses when a switch port is tuned up

D. It uses the ARP and MAC tables to authenticate users

Correct Answer: A


Question 10:

Refer to the exhibit. You are configuring Router1 and Router2 for L2TPv3 tunneling. Which two additional configurations are required to enable Router1 and Router2 to establish the tunnel? (Choose two)

A. Cisco Express Forwarding must be disabled on Router1

B. Loopback 0 on Router1 must be advertised to Router2

C. Cisco Discovery Protocol must be enabled on interface Fast Ethernet1/0 on Router1

D. An IP address must be configured on interface FastEthernet1/0 on Router1

E. Router1 must be configured to encapsulate traffic by using L2TPv3 under the pseudowire-class R1toR2

Correct Answer: BE


CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written Exam exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written Exam exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written Exam exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.

400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing

400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection