[Newest Version] Free CertBus Cisco 400-101 PDF and Exam Questions Download 100% Pass Exam

CertBus 2018 Real Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!

400-101 CCIE Exam PDF and VCE Dumps : 1379QAs Instant Download: https://www.certgod.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certgod.com/online-pdf/400-101.pdf
☆ CertBus 2018 Real 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing

Following 400-101 1379QAs are all new published by Cisco Official Exam Center

This dump is 100% valid to pass Cisco CCIE Aug 25,2018 Newest 400-101 exam questions exam. The only tips is please do not just memorize the questions and answers, you need to get through understanding of it because the question changed a little in the real exam. Follow the instructions in the CertBus CCIE Newest 400-101 study guide CCIE Routing and Switching Written v5.0 PDF and VCEs. All CertBus materials will help you pass your Cisco CCIE exam successfully.

CertBus: 400-101 certification training portal. CertBus – 400-101 certification with money back assurance. CertBus – 400-101 certification exams – original questions and answers – success guaranteed. CertBus 400-101 certification questions. CertBus provides you the easiest way to pass your 400-101 certification exam.

We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certgod.com/400-101.html

QUESTION NO:13

Which two statements are true about traffic shaping? (Choose two.)

A. Out-of-profile packets are queued.

B. It causes TCP retransmits.

C. Marking/remarking is not supported.

D. It does not respond to BECN and ForeSight Messages.

E. It uses a single/two-bucket mechanism for metering.

Answer: A,C

Explanation:


QUESTION NO:14

Which three options are features of VTP version 3? (Choose three.)

A. VTPv3 supports 8K VLANs.

B. VTPv3 supports private VLAN mapping.

C. VTPv3 allows for domain discovery.

D. VTPv3 uses a primary server concept to avoid configuration revision issues.

E. VTPv3 is not compatible with VTPv1 or VTPv2.

F. VTPv3 has a hidden password option.

Answer: B,D,F

Explanation:

Key Benefits of VTP Version 3

Much work has gone into improving the usability of VTP version 3 in three major areas:

The new version of VTP offers better administrative control over which device is allowed to update

other devices\’ view of the VLAN topology. The chance of unintended and disruptive changes is

significantly reduced, and availability is increased. The reduced risk of unintended changes will

ease the change process and help speed deployment.

Functionality for the VLAN environment has been significantly expanded. Two enhancements are

most beneficial for today\’s networks:


QUESTION NO:17

Which three combinations are valid LACP configurations that will set up a channel? (Choose

three.)

A. On/On

B. On/Auto

C. Passive/Active

D. Desirable/Auto

E. Active/Active

F. Desirable/Desirable

Answer: A,C,E

Explanation:


QUESTION NO:30

What is the flooding scope of an OSPFv3 LSA, if the value of the S2 bit is set to 1 and the S1 bit is

set to 0?

A. link local

B. area wide

C. AS wide

D. reserved

Answer: C

Explanation:

The Type 1 router LSA is now link local and the Type 2 Network LSA is AS Wide

S2 and S1 indicate the LSA\’s flooding scope. Table 9-1 shows the possible values of these two

bits and the associated flooding scopes.

Table 9-1 S bits in the OSPFv3 LSA Link State Type field and their associated flooding scopes

LSA Function Code, the last 13 bits of the LS Type field, corresponds to the OSPFv2 Type field.

Table 9-2 shows the common LSA types used by OSPFv3 and the values of their corresponding

LS Types. If you decode the hex values, you will see that the default U bit of all of them is 0. The S

bits of all LSAs except two indicate area scope. Of the remaining two, AS External LSAs have an

AS flooding scope and Link LSAs have a linklocal flooding scope. Most of the OSPFv3 LSAs have

functional counterparts in OSPFv2; these OSPFv2 LSAs and their types are also shown in Table

9-2.

Table 9-2 OSPFv3 LSA types and their OSPFv2 counterparts

Reference

http://www.networkworld.com/subnets/cisco/050107-ch9-ospfv3.html?page=1


QUESTION NO:35

Which command will define a VRF with name \’CCIE\’ in IPv6?

A. ip vrf CCIE

B. ipv6 vrf CCIE

C. vrf definition CCIE

D. ipv6 vrf definition CCIE

Answer: C

Explanation:


Latest 400-101 Dumps400-101 PDF Dumps400-101 Study Guide

QUESTION NO:37

Which command can be used on a PE router to connect to a CE router (11.1.1.4) in VRF red?

A. telnet 11.1.1.4 /vrf-source red

B. telnet 11.1.1.4 source /vrf red

C. telnet 11.1.1.4 /source vrf red

D. telnet 11.1.1.4 /vrf red

E. telnet 11.1.1.4 vrf red

Answer: D

Explanation:

Telnetting can be done through the VRF using the Management Ethernet interface. In the

following example, the router telnets to 172.17.1.1 through the Management Ethernet interface

VRF:

Router# telnet 172.17.1.1 /vrf Mgmt-intf

Reference

http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/Management_Ether

net.html


QUESTION NO:39

Which two statements are correct about Nonstop Forwarding? (Choose two.)

A. It allows the standby RP to take control of the device after a hardware or software fault on the

active RP.

B. It is a Layer 3 function that works with SSO to minimize the amount of time a network is

unavailable to users following a switchover.

C. It is supported by the implementation of EIGRP, OSPF, RIPv2, and BGP protocols.

D. It synchronizes startup configuration, startup variables, and running configuration.

E. The main objective of NSF is to continue forwarding IP packets following a switchover.

F. Layer 2 802.1w or 802.1s must be used, as 802.1d cannot process the Layer 2 changes.

G. Routing protocol tuning parameters must be the same as the NSF parameters, or failover will

be inconsistent.

Answer: B,E

Explanation: Explanation

Cisco Nonstop Forwarding (NSF) works with the Stateful Switchover (SSO) feature in Cisco IOS

software. NSF works with SSO to minimize the amount of time a network is unavailable to its

users following a switchover. The main objective of Cisco NSF is to continue forwarding IP

packets following a Route Processor (RP) switchover.

Reference

http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsnsf20s.html


QUESTION NO:44

How is RPF used in multicast routing?

A. to prevent multicast packets from looping

B. to prevent PIM packets from looping

C. to instruct PIM where to send a (*, G) or (S, G) join message

D. to prevent multicast packets from looping and to instruct PIM where to send a (*, G) or (S, G)

join message

Answer: D

Explanation:


QUESTION NO:45

Refer to the exhibit.

What does the incoming interface of the above (*, G) entry indicate?

A. the interface closest to the source, according to the unicast routing table

B. the interface where an IGMP join has been received

C. the interface with the highest IP address

D. the last interface to hear a PIM (*, G) join

E. the interface closest to the RP, according to the unicast routing table

Answer: E

Explanation:

Source Trees

A source tree is the simplest form of distribution tree. The source host of the multicast traffic is

located at the root of the tree, and the receivers are located at the ends of the branches. Multicast

traffic travels from the source host down the tree toward the receivers. The forwarding decision on

which interface a multicast packet should be transmitted out is based on the multicast forwarding

table. This table consists of a series of multicast state entries that are cached in the router. State

entries for a source tree use the notation (S, G) pronounced S comma G. The letters represents

the IP address of the source, and G represents the group address.

Shared Trees

Shared trees differ from source trees in that the root of the tree is a common point somewhere in

the network.

This common point is referred to as the rendezvous point (RP). The RP is the point at which

receivers join to learn of active sources. Multicast sources must transmit their traffic to the RP.

When receivers join a multicast group on a shared tree, the root of the tree is always the RP, and

multicast traffic is transmitted from the RP down toward the receivers. Therefore, the RP acts as a

go-between for the sources and receivers. An RP can be the root for all multicast groups in the

network, or different ranges of multicast groups can be associated with different RPs.

Multicast forwarding entries for a shared tree use the notation (*, G), which is pronounced star

comma G. This is because all sources for a particular group share the same tree. (The multicast

groups go to the same RP.)

Therefore, the * or wildcard represents all sources.

Additional Information from Microsoft

Multicast traffic from source 162.10.4.1 (for example) uses the RPT, meaning the source sends it

to the RP rather than to the multicast group (the router would denote this by having a (*, G) entry

rather than a (S, G) entry). Before sending this traffic, Router 1 checks its unicast routing table to

see if packets from the RP are arriving on the correct interface. In this case they are, because they

arrive on interface I1, and the packets are forwarded.

Reference

http://technet.microsoft.com/en-us/library/bb742462.aspx


QUESTION NO:46

Refer to the exhibit.

Which interface(s) will show ip rpf 1.1.1.2 indicate as RPF interface(s)?

A. Ethernet 1/0

B. Ethernet 0/0

C. Both Ethernet 0/0 and Ethernet 1/0

D. RPF will fail

Answer: A

Explanation:

When troubleshooting multicast routing, the primary concern is the source address. Multicast has

a concept of Reverse Path Forwarding check (RPF check). When a multicast packet arrives on an

interface, the RPF process checks to ensure that this incoming interface is the outgoing interface

used by unicast routing to reach the source of the multicast packet. This RPF check process

prevents loops. Multicast routing does not forward a packet unless the source of the packet

passes a reverse path forwarding (RPF) check. Once a packet passes this RPF check, multicast

routing forwards the packet based only upon the destination address.

Reference

http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a0080094b55.shtml


CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.

400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing

400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certgod.com/400-101.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

BrandCertbusTestkingPass4sureActualtestsOthers
Price$45.99$124.99$125.99$189$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection