CertBus 2018 Hottest Cisco 400-101 CCIE Exam VCE and PDF Dumps for Free Download!
☆ 400-101 CCIE Exam PDF and VCE Dumps : 1063QAs Instant Download: https://www.certbus.com/400-101.html [100% 400-101 Exam Pass Guaranteed or Money Refund!!]
☆ Free view online pdf on CertBus free test 400-101 PDF: https://www.certbus.com/online-pdf/400-101.pdf
☆ CertBus 2018 Hottest 400-101 CCIE exam Question PDF Free Download from Google Drive Share: https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
Following 400-101 1063QAs are all new published by Cisco Official Exam Center
There is no need to worry when you are suffering the difficult time in the CCIE Latest 400-101 vce dumps exam preparation, CertBus will assist you to pass the CCIE May 09,2018 Hotest 400-101 pdf dumps exam with latest update CCIE Hotest 400-101 free download CCIE Routing and Switching Written v5.0 PDF and VCE dumps. CertBus has the most comprehensive Cisco exam preparation materials, covering each and every aspect of CCIE Latest 400-101 pdf dumps CCIE Routing and Switching Written v5.0 exam curriculum. We ensure you 100% success in CCIE Newest 400-101 QAs exam.
CertBus| 400-101 exam dumps with pdf and vce, 100% pass guaranteed! CertBus – 100% real 400-101 certification exam questions and answers. easily pass with a high score. CertBus goal help you get passed in all 400-101 certification exams first attempt. 400-101 high pass rate and success rate. CertBus – leader of 400-101 certifications, latest dumps, guaranteed pass.
We CertBus has our own expert team. They selected and published the latest 400-101 preparation materials from Cisco Official Exam-Center: https://www.certbus.com/400-101.html
Refer to the exhibit.
A small enterprise connects its office to two ISPs, using separate T1 links. A static route is used
for the default route, pointing to both interfaces with a different administrative distance, so that one
of the default routes is preferred.
Recently the primary link has been upgraded to a new 10 Mb/s Ethernet link.
After a few weeks, they experienced a failure. The link did not pass traffic, but the primary static
route remained active. They lost their Internet connectivity, even though the backup link was
Which two possible solutions can be implemented to avoid this situation in the future? (Choose
A. Implement HSRP link tracking on the branch router R1.
B. Use a track object with an IP SLA probe for the static route on R1.
C. Track the link state of the Ethernet link using a track object on R1.
D. Use a routing protocol between R1 and the upstream ISP.
Interface tracking allows you to specify another interface on the router for the HSRP process to
monitor in order to alter the HSRP priority for a given group.
If the specified interface\’s line protocol goes down, the HSRP priority of this router is reduced,
allowing another HSRP router with higher priority can become active (if it has preemption
To configure HSRP interface tracking, use the standby [group] track interface [priority] command.
When multiple tracked interfaces are down, the priority is reduced by a cumulative amount. If you
explicitly set the decrement value, then the value is decreased by that amount if that interface is
down, and decrements are cumulative. If you do not set an explicit decrement value, then the
value is decreased by 10 for each interface that goes down, and decrements are cumulative.
The following example uses the following configuration, with the default decrement value of 10.
Note: When an HSRP group number is not specified, the default group number is group 0.
ip address 10.1.1.1 255.255.255.0
standby ip 10.1.1.3
standby priority 110
standby track serial0
standby track serial1
The HSRP behavior with this configuration is:
0 interfaces down = no decrease (priority is 110)
1 interface down = decrease by 10 (priority becomes100)
2 interfaces down = decrease by 10 (priority becomes 90)
Which two options are contained in a VTP subset advertisement? (Choose two.)
A. followers field
B. MD5 digest
C. VLAN information
D. sequence number
When you add, delete, or change a VLAN in a Catalyst, the server Catalyst where the changes are
made increments the configuration revision and issues a summary advertisement. One or several
subset advertisements follow the summary advertisement. A subset advertisement contains a list
of VLAN information.
If there are several VLANs, more than one subset advertisement can be required in order to
advertise all the VLANs.
Subset Advertisement Packet Format
This formatted example shows that each VLAN information field contains information for a different
VLAN. It is ordered so that lowered-valued ISL VLAN IDs occur first:
Most of the fields in this packet are easy to understand. These are two clarifications:
In 802.1s, how is the VLAN to instance mapping represented in the BPDU?
A. The VLAN to instance mapping is a normal 16-byte field in the MST BPDU.
B. The VLAN to instance mapping is a normal 12-byte field in the MST BPDU.
C. The VLAN to instance mapping is a 16-byte MD5 signature field in the MST BPDU.
D. The VLAN to instance mapping is a 12-byte MD5 signature field in the MST BPDU.
MST Configuration and MST Region
Each switch running MST in the network has a single MST configuration that consists of these
1. An alphanumeric configuration name (32 bytes)
2. A configuration revision number (two bytes)
3. A 4096-element table that associates each of the potential 4096 VLANs supported on the
chassis to a given instance.
In order to be part of a common MST region, a group of switches must share the same
It is up to the network administrator to properly propagate the configuration throughout the region.
Currently, this step is only possible by the means of the command line interface (CLI) or through
Management Protocol (SNMP). Other methods can be envisioned, as the IEEE specification does
not explicitly mention how to accomplish that step.
Note: If for any reason two switches differ on one or more configuration attribute, the switches are
part of different regions. For more information refer to the Region Boundary section of this
In order to ensure consistent VLAN-to-instance mapping, it is necessary for the protocol to be able
to exactly identify the boundaries of the regions. For that purpose, the characteristics of the region
are included in the BPDUs. The exact VLANs-to-instance mapping is not propagated in the BPDU,
because the switches only need to know whether they are in the same region as a neighbor.
Therefore, only a digest of the VLANs-toinstance mapping table is sent, along with the revision
number and the name. Once a switch receives a BPDU, the switch extracts the digest (a
numerical value derived from the VLAN-to-instance mapping table through a mathematical
function) and compares this digest with its own computed digest. If the digests differ, the port on
which the BPDU was received is at the boundary of a region.
In generic terms, a port is at the boundary of a region if the designated bridge on its segment is in
a different region or if it receives legacy 802.1d BPDUs. In this diagram, the port on B1 is at the
boundary of region A, whereas the ports on B2 and B3 are internal to region B:
According to the IEEE 802.1s specification, an MST bridge must be able to handle at least these
One Internal Spanning Tree (IST)
One or more Multiple Spanning Tree Instance(s) (MSTIs)
The terminology continues to evolve, as 802.1s is actually in a pre-standard phase. It is likely
these names will change in the final release of 802.1s. The Cisco implementation supports 16
instances: one IST (instance 0) and 15 MSTIs.
show vtp status
Cisco switches “show vtp status” Field Descriptions has a MD5 digest field that is a 16-byte
checksum of the
VTP configuration as shown below
Router# show vtp status
VTP Version: 3 (capable)
Configuration Revision: 1
Maximum VLANs supported locally: 1005
Number of existing VLANs: 37
VTP Operating Mode: Server
VTP Domain Name: [smartports]
VTP Pruning Mode: Disabled
VTP V2 Mode: Enabled
VTP Traps Generation: Disabled
MD5 digest : 0x26 0xEE 0x0D 0x84 0x73 0x0E 0x1B 0x69
Configuration last modified by 172.20.52.19 at 7-25-08 14:33:43
Local updater ID is 172.20.52.19 on interface Gi5/2 (first layer3 interface fou)
VTP version running: 2
Which three combinations are valid LACP configurations that will set up a channel? (Choose
Which two options does Cisco PfR use to control the entrance link selection with inbound
optimization? (Choose two.)
A. Prepend extra AS hops to the BGP prefix.
B. Advertise more specific BGP prefixes (longer mask).
C. Add (prepend) one or more communities to the prefix that is advertised by BGP.
D. Have BGP dampen the prefix.
Explanation: PfR Entrance Link Selection Control Techniques
The PfR BGP inbound optimization feature introduced the ability to influence inbound traffic. A
network advertises reachability of its inside prefixes to the Internet using eBGP advertisements to
its ISPs. If the same prefix is advertised to more than one ISP, then the network is multihoming.
PfR BGP inbound optimization works best with multihomed networks, but it can also be used with
a network that has multiple connections to the same ISP. To implement BGP inbound
optimization, PfR manipulates eBGP advertisements to influence the best entrance selection for
traffic bound for inside prefixes. The benefit of implementing the best entrance selection is limited
to a network that has more than one ISP connection.
To enforce an entrance link selection, PfR offers the following methods:
BGP Autonomous System Number Prepend When an entrance link goes out-of-policy (OOP) due
to delay, or in images prior to Cisco IOS Releases 15.2(1) T1 and 15.1(2)S, and PfR selects a
best entrance for an inside prefix, extra autonomous system hops are prepended one at a time (up
to a maximum of six) to the inside prefix BGP advertisement over the other entrances. In Cisco
IOS Releases 15.2(1)T1, 15.1(2)S, and later releases, when an entrance link goes out-of policy
(OOP) due to unreachable or loss reasons, and PfR selects a best entrance for an inside prefix,
six extra autonomous system hops are prepended immediately to the inside prefix BGP
advertisement over the other entrances. The extra autonomous system hops on the other
entrances increase the probability that the best entrance will be used for the inside prefix. When
the entrance link is OOP due to unreachable or loss reasons, six extra autonomous system hops
are added immediately to allow the software to quickly move the traffic away from the old entrance
link. This is the default method PfR uses to control an inside prefix, and no user configuration is
BGP Autonomous System Number Community Prepend
When an entrance link goes out-of-policy (OOP) due to delay, or in images prior to Cisco IOS
(1)T1 and 15.1(2)S, and PfR selects a best entrance for an inside prefix, a BGP prepend
community is attached one at a time (up to a maximum of six) to the inside prefix BGP
advertisement from the network to another autonomous system such as an ISP. In Cisco IOS
Releases 15.2(1)T1, 15.1(2)S, and later releases, when an entrance link goes out-of-policy (OOP)
due to unreachable or loss reasons, and PfR selects a best entrance for an inside prefix, six BGP
prepend communities are attached to the inside prefix BGP advertisement. The BGP prepend
community will increase the number of autonomous system hops in the advertisement of the
inside prefix from the ISP to its peers. Autonomous system prepend BGP community is the
preferred method to be used for PfR BGP inbound optimization because there is no risk of the
local ISP filtering the extra autonomous system hops. There are some issues, for example, not all
ISPs support the BGP prepend community, ISP policies may ignore or modify the autonomous
system hops, and a transit ISP may filter the autonomous system path. If you use this method of
inbound optimization and a change is made to an autonomous system, you must issue an
outbound reconfiguration using the “clear ip bgp” command.
What action will a BGP route reflector take when it receives a prefix marked with the community
attribute NO ADVERTISE from a client peer?
A. It will advertise the prefix to all other client peers and non-client peers.
B. It will not advertise the prefix to EBGP peers.
C. It will only advertise the prefix to all other IBGP peers.
D. It will not advertise the prefix to any peers.
Which two OSPF LSA types are new in OSPF version 3? (Choose two.)
B. NSSA external
C. Network link
D. Intra-area prefix
E. AS domain
New LSA Types
OSPFv3 carries over the seven basic LSA types we\’re familiar with from OSPFv2. However, the
type 1 and 2 LSAs have been re-purposed, as will be discussed in a bit. OSPFv3 also introduces
two new LSA types: Link and Intra-area Prefix.
In order to maintain security, with which hop count are IPv6 neighbor discovery packets sent?
Which command can be used on a PE router to connect to a CE router (18.104.22.168) in VRF red?
A. telnet 22.214.171.124 /vrf-source red
B. telnet 126.96.36.199 source /vrf red
C. telnet 188.8.131.52 /source vrf red
D. telnet 184.108.40.206 /vrf red
E. telnet 220.127.116.11 vrf red
Telnetting can be done through the VRF using the Management Ethernet interface. In the
following example, the router telnets to 172.17.1.1 through the Management Ethernet interface
Router# telnet 172.17.1.1 /vrf Mgmt-intf
On a router, interface S0 is running EIGRPv6, and interface S1 is running OSPFv3. A
redistribution command is issued under OSPFv3, redistribute EIGRP 1 metric 20 under ipv6 router
ospf 1. What will happen after applying this redistribution command?
A. All routes showing up as D and D EX in the routing table will be redistributed into OSPFv3.
B. All routes showing up as D, D EX, and C in the routing table will be redistributed into OSPFv3.
C. All routes showing up as D and D EX in the routing table and the S0 interface will be
redistributed into OSPFv3.
D. All routes showing up as D in the routing table will be redistributed into OSPFv3.
E. All routes showing up as D EX in the routing table will be redistributed into OSPFv3.
D are EIGRP Internal Routes and D EX are EIGRP external routes. Both Internal and External
EIGRP routes will be redistributed with the configuration shown above
CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 400-101 exam successfully with our Cisco materials. CertBus CCIE Routing and Switching Written v5.0 exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus CCIE Routing and Switching Written v5.0 exam questions and answers are the most valid. CertBus exam CCIE Routing and Switching Written v5.0 exam dumps will help you to be the Cisco specialist, clear your 400-101 exam and get the final success.
400-101 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mdEpkTFZvSDJDc2c/view?usp=sharing
400-101 Cisco exam dumps (100% Pass Guaranteed) from CertBus: https://www.certbus.com/400-101.html [100% Exam Pass Guaranteed]
Why select/choose CertBus?
Millions of interested professionals can touch the destination of success in exams by certbus.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.