Don’t worry about how to get yourself well prepared your CCNP 642-902 exam! CertBus will work you out of your CCNP 642-902 exam with the latest updated 642-902 Implementing cisco ip routing PDF and VCE dumps. CertBus provides the latest real Cisco CCNP 642-902 exam preparation material, covering every aspect of 642-902 exam curriculum.

We CertBus has our own expert team. They selected and published the latest 642-902 preparation materials from Cisco Official Exam-Center: http://www.certgod.com/642-902.html

QUESTION NO:16

Based on the information in the exhibit, which statement is true?

A. RTC will be able to access the 10.0.0.0 network.

B. RTC will not have the 10.0.0.0 network in its routing table.

C. RTC will not have the 192.168.10.0 network in its routing table.

D. RTB will not have the 10.0.0.0 network in its routing table.

E. RTB and RTC will not have the 10.0.0.0 network in their routing tables.

Correct Answer: B Explanation

Explanation/Reference:

QUESTION NO:8

Which is the correct command format to configure EIGRP summary route?

A. ip auto-summary as-number address mask

B. ip summary-address as-number address mask

C. ip auto-summary eigrp as-number address mask

D. ip summary-route eigrp as-number address mask

E. ip summary-address eigrp as-number address mask

Correct Answer: E Explanation

Explanation/Reference:

QUESTION NO:10

Refer to the exhibit. Given the exhibited router output, which command sequence can be added to R1 to generate a default route into the OSPF domain?

A. default-router

B. ip default-network

C. default-information originate always

D. ip default-gateway

Correct Answer: C Explanation

Explanation/Reference:

QUESTION NO:22

Which two routing protocols require a metric to be configured when redistributing routes from other protocols? (Choose two.)

A. RIP

B. OSPF

C. EIGRP

D. IS-IS E. BGP

Correct Answer: AC Explanation

Explanation/Reference:

Metrics must be set manually via configuration when redistributing into RIP and EIGRP, whereas OSPF uses a default value of 20

QUESTION NO:17

Which command displays statistics on EIGRP hello, updates, queries, replies, and acknowledgments?

A. debug eigrp packets

B. show ip eigrp traffic

C. show ip eigrp topology

D. show ip eigrp neighbors

Correct Answer: B Explanation

Explanation/Reference:

QUESTION NO:20

A network administrator would like to configure an EIGRP router as a stub router that advertises directly connected and summary routes only. What command must the administrator issue to accomplish this?

A. eigrp stub

B. eigrp stub connected

C. eigrp stub summary

D. eigrp stub connected static

E. eigrp stub receive-only

Correct Answer: A Explanation

Explanation/Reference:

QUESTION NO:15

What is the purpose of the eigrp stub configuration command?

A. to increase scalability by limiting the EIGRP query range

B. to reduce the size of the routing table by blocking the D EX (External EIGRP) routes into the EIGRP stub router

C. to reduce the convergence time by enabling the EIGRP stub router to propagate the EIGRP queries from the EIGRP hub router

D. to reduce the convergence time by enabling the EIGRP stub router to also perform query requests to the EIGRP hub router

Correct Answer: A Explanation

Explanation/Reference:

The EIGRP Stub Routing feature improves network stability, reduce resources utilization, and simplifies stub router configuration. Stub routing is commonly used in a hub and spoke network topology. You need to configure the distribution (hub) and remote (spoke) routers to use EIGRP, and only the remote router as a stub. Only specified routes are propagated from the stub router. The router responds to queries for summaries, connected routes, redistributed static routes, external routes, and internal routes with the message “inaccessible”. A stub router will send a special peer information packet to all neighboring routers to report its status as a stub router. Any neighbor that receives a packet informing it of the stub status will not query the stub router for any routes, and a router that has a stub peer will not query that peer. The stub router will depend on the distribution router to send the proper updates to all peers.

QUESTION NO:9

Which is the most effective technique to contain EIGRP queries?

A. route summarization

B. configuring route filters

C. using a hierarchical addressing scheme

D. establishing separate autonomous systems

Correct Answer: A Explanation

Explanation/Reference:

After you determine the minimum routing requirements, you can make EIGRP more scalable. Two of the best options are the following:

1.Configure route summarization using the ip summary-address eigrp command on the outbound interface of the appropriate routers.

2. Configure the remote routers as stub EIGRP routers. Summarizing routes limits the queries scope by limiting a routers knowledge of networks subnets. If a subnet goes down, queries go only as far as the routers that have knowledge of that subnet.

QUESTION NO:2

Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Which statement is true?

ip dhcp pool 1

network 172.16.1.0/24

domain-name cisco.com

dns-server 172.16.1.102

netbios-name-server 172.16.1.103

default-router 172.16.1.100 172.16.1.101

lease 30

!

ip dhcp pool 1

network 172.16.2.0/24

domain-name cisco.com

dns-server 172.16.2.102

netbios-name-server 172.16.2.103

default-router 172.16.2.100 172.16.2.101

lease 30

A. The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then the router will begin distributing addresses from pool 2.

B. The router will choose which pool to use based upon the interface the DHCP request was received on.

C. The configuration is invalid because the DHCP options are global configuration commands.

D. The configuration is incomplete until the DHCP pools are bound to the appropriate interface or interfaces.

Correct Answer: B Explanation Explanation/Reference:

QUESTION NO:3

Refer to the exhibit. On the basis of the information presented, which statement is true?

RTA#show ip route ospf

O IA 6.0.0.0/8 {110/65] via 5.0.0.2, 00:00:18 Serial2/1/0

O*N2 0.0.0.0/0 [110/1] via 5.0.0.2, 00:00:18 Serial2/1/0

A. A default route is configured on the local router.

B. Network 6.0.0.0/8 was learned from an OSPF neighbor within the area.

C. OSPF router 5.0.0.2 is an ABR.

D. The default route is learned from an OSPF neighbor.

Correct Answer: C Explanation

Explanation/Reference:

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 642-902 exam successfully with our Cisco materials. CertBus Implementing cisco ip routing exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Implementing cisco ip routing exam questions and answers are the most valid. CertBus exam Implementing cisco ip routing exam dumps will help you to be the Cisco specialist, clear your 642-902 exam and get the final success.

642-902 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mZzgwS3ZuOEh6Q2s/view?usp=sharing

642-902 Cisco exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/642-902.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection