CertBus provides the most up to date and accurate preparing materials of the 642-902 certification exam questions and answers , testing software, exam PDF and VCE files to help you prepare your 642-902 Implementing cisco ip routing exam. What training you are looking for? Come to visit our site and choose CertBus online certification materials, you will get a quick and cost-efficient way to become a Cisco certified professional in IT industry.

We CertBus has our own expert team. They selected and published the latest 642-902 preparation materials from Cisco Official Exam-Center: http://www.certgod.com/642-902.html

QUESTION NO:22

Which two routing protocols require a metric to be configured when redistributing routes from other protocols? (Choose two.)

A. RIP

B. OSPF

C. EIGRP

D. IS-IS E. BGP

Correct Answer: AC Explanation

Explanation/Reference:

Metrics must be set manually via configuration when redistributing into RIP and EIGRP, whereas OSPF uses a default value of 20

QUESTION NO:26

Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF and RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem?

A. The redistribution command should be reentered with the match route-typeparameter included.

B. The redistribution command should be reentered with the route-map map-tagparameter included.

C. The redistribution command should be reentered with the metric metric-value parameter included.

D. Routes will first need to be distributed into another protocol, and then into RIP.

Correct Answer: C Explanation

Explanation/Reference:

Notice that RIP metric is based on hop count only, and the maximum valid metric is 15. Anything above 15 is considered infinite. By default, when no metric is assigned when redistributing from EIGRP, OSPF, IS-IS, BGP into RIP, the default metric will be infinite. Therefore we must define a metric that is understandable to the receiving protocol. Usually, we should use a small value (like 1, 2, 3) so that after redistributing, that route can be advertised through many routers (because the limit is 15).

QUESTION NO:1

Which statement is true about the implementation of IPv6 in an already existing IPv4 network?

A. IPv6 can be routed using the same routing protocol versions as IPv4

B. A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them.

C. IPv4 and IPv6 networks can be routed simultaneously.

D. Only OSPF version 3 can be utilized for routing IPv4 and IPv6.

Correct Answer: C Explanation

Explanation/Reference:

QUESTION NO:13

A network administrator assigns a multicast address of 239.255.8.5 to an application running on a device with an Ethernet MAC address of 01.b2.7d.05.f1.80. Which Layer 2 multicast address will this device use?

A. 01.00.5e.7F.08.05

B. 01.b2.7d.05.f1.80

C. 01.b2.7d.0a.08.05

D. 01.00.5e.05.f1.80

E. ff.ff.ff.ff.ff.ff

Correct Answer: A Explanation

Explanation/Reference:

QUESTION NO:18

A company has a BGP network and a BGP route of 196.27.125.0/24 that should be propagated to all of the devices. The route is not now in any of the routing tables. The administrator determines that an access list is the cause of the problem. The administrator changes the access list to allow this route, but the route still does not appear in any of the routing tables. What should be done to propagate this route?

A. Clear the BGP session.

B. Use the release BGP routing command.

C. Use the service-policy command to adjust the QOS policy to allow the route to propagate.

D. Change both the inbound and outbound policy related to this route.

Correct Answer: A Explanation

Explanation/Reference:

QUESTION NO:10

Refer to the exhibit. Given the exhibited router output, which command sequence can be added to R1 to generate a default route into the OSPF domain?

A. default-router

B. ip default-network

C. default-information originate always

D. ip default-gateway

Correct Answer: C Explanation

Explanation/Reference:

QUESTION NO:17

Which command displays statistics on EIGRP hello, updates, queries, replies, and acknowledgments?

A. debug eigrp packets

B. show ip eigrp traffic

C. show ip eigrp topology

D. show ip eigrp neighbors

Correct Answer: B Explanation

Explanation/Reference:

QUESTION NO:36

Refer to the exhibit. When you examine the routing table of R1 and R4, you are not able to see the R1 Ethernet subnet on the R4 routing table. You are also not able to see the R4 Ethernet subnet on the R1 routing table. Which configuration change should be made to resolve this issue? Select the routers where the configuration change will be required, and select the required EIGRP configuration command(s). (Choose two.)

A. R1 and R4

B. R2 and R3

C. ip summary-address eigrp 1 10.1.1.0 255.255.255.0 and ip summary-address eigrp 1

D. variance 2

E. eigrp stub connected

F. no auto-summary

Correct Answer: BF Explanation

Explanation/Reference:

QUESTION NO:2

Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Which statement is true?

ip dhcp pool 1

network 172.16.1.0/24

domain-name cisco.com

dns-server 172.16.1.102

netbios-name-server 172.16.1.103

default-router 172.16.1.100 172.16.1.101

lease 30

!

ip dhcp pool 1

network 172.16.2.0/24

domain-name cisco.com

dns-server 172.16.2.102

netbios-name-server 172.16.2.103

default-router 172.16.2.100 172.16.2.101

lease 30

A. The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then the router will begin distributing addresses from pool 2.

B. The router will choose which pool to use based upon the interface the DHCP request was received on.

C. The configuration is invalid because the DHCP options are global configuration commands.

D. The configuration is incomplete until the DHCP pools are bound to the appropriate interface or interfaces.

Correct Answer: B Explanation Explanation/Reference:

QUESTION NO:20

A network administrator would like to configure an EIGRP router as a stub router that advertises directly connected and summary routes only. What command must the administrator issue to accomplish this?

A. eigrp stub

B. eigrp stub connected

C. eigrp stub summary

D. eigrp stub connected static

E. eigrp stub receive-only

Correct Answer: A Explanation

Explanation/Reference:

CertBus exam braindumps are pass guaranteed. We guarantee your pass for the 642-902 exam successfully with our Cisco materials. CertBus Implementing cisco ip routing exam PDF and VCE are the latest and most accurate. We have the best Cisco in our team to make sure CertBus Implementing cisco ip routing exam questions and answers are the most valid. CertBus exam Implementing cisco ip routing exam dumps will help you to be the Cisco specialist, clear your 642-902 exam and get the final success.

642-902 Latest questions and answers on Google Drive(100% Free Download): https://drive.google.com/file/d/0B_3QX8HGRR1mZzgwS3ZuOEh6Q2s/view?usp=sharing

642-902 Cisco exam dumps (100% Pass Guaranteed) from CertBus: http://www.certgod.com/642-902.html [100% Exam Pass Guaranteed]

Why select/choose CertBus?

Millions of interested professionals can touch the destination of success in exams by certgod.com. products which would be available, affordable, updated and of really best quality to overcome the difficulties of any course outlines. Questions and Answers material is updated in highly outclass manner on regular basis and material is released periodically and is available in testing centers with whom we are maintaining our relationship to get latest material.

Brand	Certbus	Testking	Pass4sure	Actualtests	Others
Price	$45.99	$124.99	$125.99	$189	$69.99-99.99
Up-to-Date Dumps
Free 365 Days Update
Real Questions
Printable PDF
Test Engine
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back
Secure Payment
Privacy Protection